MOTM

I tried the 420/440 trick which worked great until i deafened everyone by
accidentally tweaking the resonance knob into feedback range, that level is
still 10v p/p. I thought about turning down the CV MOD on the 110, but
doesn't that act like an FM input on a filter or oscillator? if i
attenutate the CV going into the VCA, won't it change the characteristics
of the envelope? instead of having a usable voltage range of 0-5v, i'd be
dropping it to 0-1.5v. i could be wrong, however, that's why i'm asking you
kind people. -nate







>
>RE: motm levelsThere is NO NEED to build 'output attenuators' for MOTM!
>
>
>
>a) Use the input level of the '420 or '440. Just set the IN level to like 3.
>
>That will reduce the
>
>output signal to about +2dBu. In other words: if your patch has a '420 or
>
>'440 in the signal path,
>
>just crank the gain down in the filter.
>
>
>
>b) use the CV MOD pot on the '110. This can be thought of as an overall
>
>'volume' control. If the '110
>
>is the last module in the signal path, try setting CV MOD to like 4.
>
>
>
>Paul S.
>
>
>
>
>
>
>  Yahoo! Groups Sponsor
><http://rd.yahoo.com/M=190462.1393721.2979173.2/D=egroupmail/S=1700032277:N/A=55
>1015/?http://www.debticated.com>
> Your use of Yahoo! Groups is subject to the
><http://docs.yahoo.com/info/terms/>Yahoo! Terms of Service.


Please reply to:
nate@...
www.etanstudios.com