MOTM

Joseph,

You might want to check the configuration on your Hammond.  I have used mine to
control my MOTM and modular stuff through an Expressionist without any problems.  I
have managed to get the XK-2 setup munged up enough that it was spewing out lots of
garbage MIDI messages that could certainly clog up any device and generally bog down
performance.

I have not used the velocity sensitivity of the XK-2 to provide a CV for the MOTM
stuff so I don't know if there is an issue there but I have used it with other MIDI
devices and the velocity sensitivity seems to be OK.  The XK-2 does not support MIDI
after-touch so you can't map that to a CV.

I hope that helps.

   Eric


--- josephcasbarian@... wrote:
> Hi group,
> I don't know very much about MIDI, but i'm using a Hammond xk-2(b-3 
> clone)and find it to be unsatisfactory. As my controler, it runs into 
> an expressionist for the CV, but it seems kind of slugish. It seems 
> like there is some sort of delay in the signal.  I have to keep my 
> playing very deliberate, pressing the keys down hard and simple. What 
> I mean by all that, is that it isn't very sensitive. It sucks as a 
> performance instrument used to control my MOTM. Is it the conversion, 
> or that I have two independent CVs out? Is there a better keyboard 
> for the Expressionist? Or is it to be expected?
> 
> Thanks,
> Joseph Casbarian
> 
> 
> 
> 
>  
> 
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ 
> 
> 


__________________________________________________
Do You Yahoo!?
Make international calls for as low as $.04/minute with Yahoo! Messenger
http://phonecard.yahoo.com/