MOTM

----- Original Message -----
From: J. Larry Hendry <jlarryh@...>
> Al found that
> connecting his rotary switches to the PCB first and then assembling
> everything to the front panel was the best method for him.

hello all,
on both my 822s & 831s i found that for me the far easiest way was to solder
the short wires to the PCB first, then fix the switches to the panel, then
solder the wires to the switches, using a meter along the way to check
finally the pcb is coaxed into place and fixed on the bracket

cheers
paul b