MOTM

Hey, you're welcome!  For more interesting variations, try two 300s 
connected this way to both channels on the 700.  I did this and then 
used the TRI out of one to PWM the other and vice-versa.  This 
fattens things up nicely.  Try SYNcing these as well...

Mike

--- In motm@y..., "Josue Arias" <josue@A...> wrote:
> Nice Trick!
> 
> Thanks Mike,
> 
> Josue.
> 
> ----- Original Message -----
> From: "mmarsh100" <mmarsh@s...>
> To: <motm@y...>
> Sent: Thursday, April 18, 2002 10:33 PM
> Subject: [motm] Wave shaping using the 700
> 
> 
> > Hello All -
> >
> > This may not be news to some, but I've stumbled on a cool trick.
> > Take the SAW out of a 300 to IO A of the 700; take PULSE out of 
the
> > same 300 to IO B of the 700.  Take SIN out of the same 300 to CV 
IN
> > of the 700.  IO X to the console or to further processing.  Put 
the
> > 700 in VOLTAGE MODE.  What happens is that the SAW waveform starts
> > and halfway through gets abruptly replaced by the PULSE.  Voila! 
new
> > waveform.  Play with the mix knob some, etc.
> >
> > Mike
> >
> >
> >
> >
> >
> > Your use of Yahoo! Groups is subject to 
http://docs.yahoo.com/info/terms/
> >
> >