MOTM

>     Today I decided to mount my Kenton Pro-2000 in my MOTM cabinet. After
> doing so I realized how cool it would be to have a MOTM style "breakout
> panel" that would bring the 6 auxillary jacks to the front. This would
make
> patching 100 times easier. Has anyone done this, or know how?

I'm using a 19" 1U patchbay for my Kenton Pro-2. I bought 25 cables with
1/8"
jacks already mounted on one side (cheap surplus stuff, and avoiding the
solder
work on the tiny plugs), cut them to the right length, and soldered 1/4"
jacks
on the other side. These go into the *back* of the patchbay. As the patchbay
is
19" wide, you can locate the V/Oct jacks near the VCOs, and the Controller
jacks near the other stuff. As the patchbay is not filled with the Kenton
CVs,
I'm using the other jacks for Pedals, sequencer/arpeggiator clock
distribution
etc.

JH.