MOTM

My curiosity got the better of me.  Here's what I measured for
resistance on patch cables with my 5-6 digit multimeter (0.1% accuracy,
.01 ohm resolution). Consider these relative numbers since this is near
the bottom of my meter's range. I have subtracted out probe resistance.

Make				Signal resistance	Shield
resistance
Hosa				0.35 ohm		0.34 ohm
Peavey			0.19 ohm		0.21 ohm
Synthesizers.com		0.11 ohm		0.18 ohm

I did not have any 3 foot Cable-ups to test.  

Based upon this I would recommend the Peavey's over the Hosa's.  They
look and feel nicer too, and are cheaper to boot.

John Loffink
jloffink@... 

> -----Original Message-----
> From: John Loffink [mailto:jloffink@...]
> Sent: Monday, December 16, 2002 2:37 PM
> To: mmarsh@...; motm@yahoogroups.com
> Subject: RE: [motm] Re: 1/4" Patch Cables
> 
> http://www.peavey.com
> 
> Apparently these will ship from the nearest retailer with them in
stock.
> I got them in just a matter of days.
> 
> Since they are molded it is hard to say whether the wire gauge or
> shielding is any better.
> 
> John Loffink
> jloffink@...
>