Yahoo Groups archive

MOTM

Index last updated: 2026-04-28 23:35 UTC

Message

Re: The dot com QCS44 Tilted Walnut Studio Cabinet - space question

2005-03-30 by synthbaron

--- In motm@yahoogroups.com, "J. Larry Hendry" <jlarryh@i...> wrote:

> The 490 mounts on a Stooge products 3 pot short bracket.  Many MOTM 
products
> have a bracket that is just as deep, but is 1.625 inches taller. 

I figure I could squeeze another 2 1/4" (a slightly innacurate and 
conservative measurement) in the downward direction. So MOTM should 
fit just fine.

> To determine if the 3 pot long bracket will fit, extend an
> imaginary line straight back from the bottom of the bracket 2.75" 
and see if
> that hits the bottom of the dot com cabinet.

Oh, no, there's plenty of room for that bracket. Your 4 pot "long" one 
looks like it would would fit too.

:-)

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.