Yahoo Groups archive

MOTM

Index last updated: 2026-04-28 23:35 UTC

Message

Re: [motm] MOTM-ized Blacet Filthy Filtre

2005-12-21 by John Blacet

I'm not absolutely sure how Larry did this but he might have used the four outputs of the LM3914 to drive LEDs as well as switch the MAX364. The 3914 provides a common at each step and the 364 is a "reverse" control type switch (high = OFF).

Some experimentation is in order unless someone can locate a schematic.

Dana Countryman wrote:
Howdy,

I purchased a MOTM-ized panel for Blacet's Filthy Filtre from Larry
Hendry's estate.

I'm getting ready to put the kit together, but it appears that Larry
modified the original design, adding 4 LED's. Here's the graphic:

http://larry.retrosynth.com/larry/panel/gif/blacet_filthy_filtre_revb.
gif

Anyone have any idea how to add the LED's into the circuit design??

Help,


-Dana Countryman

http://www.danacountryman.com






-- 
Regards,
John Blacet

Blacet Research
http://www.blacet.com

Attachments

  • No local attachments were found for this message.

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.