MOTM

The problem I found was that with a sinus signal in both x and y 
inputs, I do not hear any warping of the y signal, regardless of the 
knob positions, also unplugging the x input makes no difference

with only a sinus signal to the x input I did some measuring :
On R1 ( resistor between pot and TL072 ) I can read a voltage, but on 
the resistor R5 ( resistor after TL072 )I do not find any voltage. 
Would that indicate that there is a problem with the TL072 ?

Steven

--- In motm@yahoogroups.com, "Paul Schreiber" <synth1@...> wrote:
>
> 'X' is mainly a CV input, not audio (Y is the main audio input for 
warping).
> 
> Paul S.
> 
> ----- Original Message ----- 
> From: "stiebz" <theevaporizer@...>
> To: <motm@yahoogroups.com>
> Sent: Sunday, August 06, 2006 8:32 AM
> Subject: [motm] wavewarper problem
> 
> 
> > there seems to be problem with my wavewarper,
> > 
> > if I give an input to the audio x input, I get no output 
whatsoever 
> > independend of the knobsettings
> > 
> > the Y & Z seems to work OK, individually but also while 'warping'
> > 
> > I can read a voltage on the potmeter of X IN and the jack seems 
to 
> > wired correctly, but other than that I have no clue what could be 
the 
> > problem, anybody any idea ?
> > 
> > many thanks in advance !
> > steven
> > 
> > 
> > 
> > 
> > 
> > 
> > 
> > Yahoo! Groups Links
> > 
> > 
> > 
> > 
> > 
> >
>