MOTM

Thanks for your thoughts, Adam! J 

 

I think Synthcube is the current IP holder (or whatever) for all the MOTM stuff. I wrote them first and they responded “we have 900, 950 and 960.... No 990 yet” so it sounds like they may make some at some point but, I’m betting the demand for that board is very low. 

 

Since so few MOTM modules were ever produced that need +5v, I would think a redesign of the 990 might be good where there are only 2 or 3 six pin MTA-156 connectors and the rest of the positions split between six pin MTA-100 and 4 pin MTA-156?

 

Anyways, all of my cases except 1 have MOTM distribution boards and I want to keep things consistent if I can, for better or worse. I have many six pin MTA-156 to six pin MTA-100 cables I’ve made to power all the modules I have with DotCom power headers. J  

 

John

 

 

From: 'Adam Schabtach' lists@studionebula.com [motm] [mailto:motm-noreply@yahoogroups.com] 
Sent: Saturday, June 4, 2016 12:24 PM
To: motm@yahoogroups.com
Subject: RE: [motm] Looking for a MOTM-990 distro board

 






Aha. Disregard what I said about making a new PCB. J If someone is stocking assembled units for $20, that’s the way to go. Note, however, that it has the synthesizer.com-style connectors rather than the MOTM-style connectors.

 

--Adam

 

From: motm@yahoogroups.com [mailto:motm@yahoogroups.com] On Behalf Of 'John L Rice' Drummer@... [motm]
Sent: Saturday, June 04, 2016 12:56 PM
To: motm@yahoogroups.com
Subject: RE: [motm] Looking for a MOTM-990 distro board

 

  

Thanks for responding George and Paul! J 

 

Yes, the list is so dead and empty I wasn’t even sure I’d hear an echo! ;-)  Thanks for the reminded of the guy on Muff’s who made some. I remember the thread but can’t find it now. 

 

The good news is that a friend contacted me directly after seeing my post to this list and thinks he has one or more original MOTM distro boards in storage and is going to look for them.  J 

 

If he doesn’t have them and I can’t find one elsewhere I’ll just go with a couple of the nice little ones that Analog Craftsman makes. 

http://analogcraftsman.com/?product=acbus#tab-description

 

Cheers!

John

 

From: Paul Bower paul@... [motm] [mailto:motm-noreply@yahoogroups.com] 
Sent: Saturday, June 4, 2016 11:28 AM
To: <motm@yahoogroups.com> List
Subject: Re: [motm] Looking for a MOTM-990 distro board

 



I’ll chime in now then :-)

 

I’ve been racking my brains, but I’m sure there’s a guy on Muffs who made his own

Not the full 990, but (if memory serves) it was a combination of power headers, including, I think some 6 pin MTA156 - i think…

 

Fairly certain he’s in Germany, and thought it was LED-Man - but I’m wrong unless he’s changed his Muff signature

 

Whomever this chap is, his Muff signature mentions he has distro PCBs for sale

 

Hope that helps - sorry for being cryptic :-)

 

Nice to give the MOTM list a dusting off everynowandagain…

 

Cheers

Paul

Sunny Sheffield

 

On 4 Jun 2016, at 19:20, George Kisslak groovyshaman@snet.net [motm] <motm-noreply@yahoogroups.com> wrote:

 

Wow - did you hear the sound of distant echos when you said that??  :-)

Sorry John, I don't have one.

-George

On 6/3/2016 6:22 AM, Drummer@... [motm] wrote:

Hi all! 

 

I'm on the hunt for a MOTM-990 power distribution board (the one with that supports a +5v rail with some 6 pin connectors)

 

Thanks!

John L Rice

drummer@...

 

 

 


  _____  


This email has been scanned by Netintelligence
 <http://www.netintelligence.com/email> http://www.netintelligence.com/email


  _____  


 

Paul Bower

Un! Recordings Limited

Company Reg. 06870185

 

http://unrecordings.blogspot.co.uk