MOTM

In a message dated 8/5/2000 8:14:13 PM, synth1@... writes:

>2) If you are planning a cabinet that holds over 22 MOTM modules, then
>I
>*strongly* suggest getting a larger supply. I suggest the Power One model
>HBB15-1.5-A. It is 1" larger in all 3 dimensions, but can power twice as
>many
>modules.

This is the PSU I've been using. I was able to mount it to the 900 front 
panel by merely (very carefully) drilling two mounting holes through the 
PSU's brushed aluminum body. It's a bit of a tight fit, but it will work.

BTW, do the power consumption figures which indicate optimal power 
consumption remain roughly constant regardless of what the modules is doing 
(i.e., is a VCO in a static drone state using similar amounts of power to one 
which is being modulated by all sorts of external modules)?

JB