MOTM

Hi All

I hope you don't mind me posting the picture, but with the sequencer
interest, I thought it might be relevant.

The sequencer is based on Tomg's Sequencer 2 and works very well with the
MOTM set-up, a few capacitor values had to be changed to get it to trigger
and work from the 320.  By the way, anybody worried about having eight
smaller knobs in one column (i.e. the up and coming UEG) Don't be, it works
well.

Paul, yes it has a separate Power supply so lots of led's.

The rest of the modules you may not have seen before are mainly Tony
Allgoods Oakley modules, plus a Blacet Dark Star.
All the MOTM modules are there. Plus the keyboard at the bottom is an E&MM
Spectrum keyboard controller and LFO, dug out of the loft after twenty
years(ish).

My main problem is only three spaces left, the 820 immanent plus some more
Oakley and Blacet modules under construction. I am not sure I will get away
with "oh yes it has always been that high" again, especially when this time
it will have to grow wider. Oh well, ear bashing time again.

Regards

Andy

andrew.hartley@...