MOTM

Thanks.  No, I wasn't planning a back for the cabinet at the moment.  Right now it
is sitting pretty close to a wall in the middle of a "stack" with no air vents
nearby so dust accumulation should be minimal.  The depth of the box at about 10"
also provides a pretty good overhang over the modules.  

If I do put a back on it, I will probably use some thin "Masonite" and put holes
around the PS. If the PS wasn't so close to the back, I would go even simpler and
tack some fabric, like chinz (sp) on the back.  I had been planning to do that for a
20" deep rack that has held my modules for about 10 months now but I noticed that
there was almost no dust on the modules in that amount of time.  If the modules had
been lower in the rack, perhaps that would have made a difference.  I find that
horizontal surfaces and stuff near the floor gets dusty in my studio.  The other
items stay fairly clean with little cleaning.

BTW, I forgot to thank you Larry, for providing the wire I used!  It was great stuff
and very easy to work with for the PS distribution.

Thanks,
    Eric

--- "J. Larry Hendry" <jlarryh@...> wrote:
> Thanks for sharing Eric.  It looks nice.  Do you have a back planned for it?
> If so, made of what?  Will you have any ventilation around the PS if you
> have a back?
> 
> Larry H
> 



__________________________________________________
Do You Yahoo!?
Yahoo! Messenger - Talk while you surf!  It's FREE.
http://im.yahoo.com/