MOTM

Well, it took me a while to get through them all, edit, compress, organize
and upload (26K connection. sigh...).  But, finally, I have about 40 photos
from my NAMM experience on line. I took lots more, but limited what I put up
to mostly synth stuff and the people I met in and around the MOTM booth.
Enjoy.

http://www.wiseguysynth.com/larry/namm/2003/namm2003.htm

Larry Hendry
www.wiseguysynth.com

Larry Hendry writes:
>>But, finally, I have about 40 photos from my NAMM experience on line.<<

Thanks for posting the picts. Just one correction though.  That's Vermona gear 
(not more Doepfer) in the two cases below the picture of the large Doepfer.

I was hoping there would be goofier looking people we could make fun of but I'm 
not seeing anybody who looks as moronic as the "pineapple hair guy" from that 
other show.

-Elhardt

> ----- Original Message -----
> From: <elhardt@...>
> Thanks for posting the picts. Just one correction though.  That's Vermona
gear (not more Doepfer) in the two cases below the picture of the large
Doepfer.

Thanks Ken.  I suspected as much and put the ? in the text.  I was not sure
if that was another Doepfer line or not.  I don't follow their gear.  I'll
get the text updated with this info.  Thanks.

> I was hoping there would be goofier looking people we could make fun of
but I'm not seeing anybody who looks as moronic as the "pineapple hair guy"
from that other show.

I hear that Saturday the day for the biggest crowd and many of those that
exist on the fringe.  I stayed away Saturday and visited a friend. However,
on Friday I did see two guys with platform shoes that were at least 8" and
maybe closer to 10."  They were already tall skinny guys, and that made them
tower over everyone else.

Larry

I just saw the NAMM pictures (thanks Larry :) So nevermind the size 
of the knobs, what the Encore Frequency Shifter needs is oscillator 
outputs.

Have a look at the Frequency Shifter mockup on the Encore website, it 
has oscillator outputs. The one at NAMM is the original prototype by 
Chris MacDonald. I believe the mockup is closer to what we'll get 
from Tony.

At 2:55 PM -0500 2003/01/24, media.nai@... wrote:

>I just saw the NAMM pictures (thanks Larry :) So nevermind the size
>of the knobs, what the Encore Frequency Shifter needs is oscillator
>outputs.
>

I'm still hoping for a mix output (with attenuators for original input, freq. down, and freq up).  Please?

--PBr

-----Original Message-----
From: Scott Juskiw [mailto:scott@...]
Sent: Friday, January 24, 2003 12:48 PM
To: MOTM List
Subject: Re: [motm] Nevermind the size of the knobs!!


Have a look at the Frequency Shifter mockup on the Encore website, it 
has oscillator outputs. The one at NAMM is the original prototype by 
Chris MacDonald. I believe the mockup is closer to what we'll get 
from Tony.

>Have a look at the Frequency Shifter mockup on the Encore website, it
>has oscillator outputs. The one at NAMM is the original prototype by
>Chris MacDonald. I believe the mockup is closer to what we'll get
>from Tony.

OK :)   Sorry if I wasn't paying attention.

>I'm still hoping for a mix output (with attenuators for original 
>input, freq. down, and freq up).  Please?

If you mixed up and down, wouldn't that be a ringmod??