Patch: Pulse Divide by two
2003-05-04 by John Loffink
I'm on a roll for 700 applications. This divides a square wave frequency by two. Good for clocking/gate applications or suboctave square waveforms. Required Modules: 320 VCLFO or 390 uLFO or 300 VCO 700 VC Router Oakley Multimix (MOTM mixer does not have enough gain, need gain of -1) 910 Cascaded Multiple Connections 300/320/390 TRIANGLE to 700 CV IN 300/320/390 SQUARE/PULSE (set pulse at 50%) to MULT (Note: this needs to be the same oscillator as the triangle wave) MULT to Oakley Multimix IN1 and 700 IO A Multimix OUT1 to 700 IO B 700 IO X is divided square out Settings: 300/320/390 Rate/Frequency = any 700 Mode = voltage 700 Switch = 0 for square wave, any other setting for uneven pulses Oakley Multimix IN 1 = -5 For modulation of pulse width, mix the TRIANGLE wave with a second LFO sine or triangle, then feed that to the 700 CV IN. John Loffink jloffink@... The Microtonal Synthesis Web Site http://www.microtonal-synthesis.com/ The Wavemakers Modular and Integrated Synthesizer Web Site http://www.wavemakers-synth.com/