Saturday night fever
1999-04-18 by Paul Schreiber
Well, after hunting down an obsure issue with the VCO (too little reference current for the expo. pair) I got the new pcbs all running 100%. Using a Kenton Pro2000 MIDI-CV, here is how I got the tracking set in about 2 minutes (after a 5 min warm-up) Fout [ideal] Fout [actual] % error 249.94 <<<baseline value I started with 499.88 500.01 0.02% 999.76 999.87 0.01% 1999.52 1999.81 0.01% 3999.1 4000.11 0.02% By God, THAT's tracking like a mother!!! I got the same error percentages from 55, 110, 220, 440 hertz octaves. So, my claim of 10 octaves of less than 0.1% error holds up! Actually, the average error I measured over 9 octaves was 0.0165%. The best to this prior I have seen was am EMu VCO that over this range was about 0.275% average error. So the MOTM-300 is *TWENTY* times better. A Moog 921B is about 0.35% error. Pathetic. It is looking like next Wednesday for VCO shipments to begin. Last week, my #1 income source (Texas Instruments) demanded 100% bandwidth ALL WEEK. So, not much got done. I now have to write the manual (and let RoyT proofread it) and continue to pack up a zillion parts. Paul Schreiber