MOTM

Dave,  If you would like a competing bid, I know a shop that might be
interested.  If you send me the specs that you have so were are comparing
exactly the same, I would be happy to obtain another estimate.  I am still
interested at that price, but it seems a bit high.
Larry Hendry


----------
> From: Dave Bradley <daveb@...>
> To: motm@egroups.com
> Subject: RE: [motm] Panel drilling template 
> Date: Wednesday, April 19, 2000 4:15 PM
> 
> Update - I wasted 2 weeks screwing around with one machine shop, only to
be
> finally blown off today, so I just came back from another one. They will
be
> making a 2U steel panel for me, 3/16" thick, with half the panel
templated
> for 8 rows of 2 jacks, the other half templated for standard pot and/or
> switch locations. The estimated cost is $40 - $50.
> 
> All interested folk contact me, and tell me if you'd be interested in my
> having a bunch made, or if you'd rather just get a drawing and have it
made
> locally. I'm not sure I could get much of a discount unless they ran 100
> pieces or more.
> 
> Dave Bradley
> Principal Software Engineer
> Engineering Animation, Inc.
> daveb@...
> 
> > -----Original Message-----
> > From: J. Larry Hendry [mailto:jlarryh@...]
> > Sent: Thursday, April 06, 2000 10:36 AM
> > To: motm@egroups.com
> > Subject: Re: [motm] Patch Panel
> >
> >
> > > From: Dave Bradley <daveb@...>
> > >
> > > I have plans to drill a lot of panels for DIY
> > > stuff in the future. I'm going to a machine shop,
> > > have them cut a metal template for a 2U wide
> > > panel, and precision drill small pilot holes at
> > > every location an MOTM panel could have
> > > holes. Then I can simply bolt the template
> > > to a blank using the 4 corner
> > > holes, and get perfectly aligned pilot holes.
> >
> > Bradley, you stooge!  You are a freakin' genius.  Since you are going
to
> > all the trouble, how about counting how many list members would like to
> > have one of those templates and getting a quantity break for
> > yourself too.
> > I would buy one.
> >
> > Larry H
> >
> >
> >
> >
------------------------------------------------------------------------
> > LOW RATE, NO WAIT!
> > Get a NextCard Visa, in 30 seconds!  Get rates
> > as low as 2.9% Intro or 9.9% Fixed APR and no hidden fees.
> > Learn more at:
> > http://click.egroups.com/1/937/3/_/529958/_/955035212/
> >
------------------------------------------------------------------------

> >
> >
> 
> 
> ------------------------------------------------------------------------
> Get paid while you shop!
> You also get an additional 10% off on retailers
> like--Disney.com, eCost.com, FogDog.com and more.
> http://click.egroups.com/1/3416/3/_/529958/_/956178999/
> ------------------------------------------------------------------------
> 
>

count me in for a template guide, please. Thanks,

nathan durham

>Update - I wasted 2 weeks screwing around with one machine shop, only to be
>finally blown off today, so I just came back from another one. They will be
>making a 2U steel panel for me, 3/16" thick, with half the panel templated
>for 8 rows of 2 jacks, the other half templated for standard pot and/or
>switch locations. The estimated cost is $40 - $50.
>
>All interested folk contact me, and tell me if you'd be interested in my
>having a bunch made, or if you'd rather just get a drawing and have it made
>locally. I'm not sure I could get much of a discount unless they ran 100
>pieces or more.
>
>Dave Bradley
>Principal Software Engineer
>Engineering Animation, Inc.
>daveb@...