There is a tuning "pin" at the back and I had to adjust it a couple times last night before it stabilized. I did no move it radically at all and not even sure where it lay in terms of run out or adjustment room (if you know what i mean). I may be taking it to a local guy who is a mad professor tech. If it could be something simple it would be good. --- In newmellotrongroup@yahoogroups.com, gino wong <wonggster@...> wrote: > > There may be a tuning trimpot on the back of the case depending on what rev > unit you have, most Crumar gear has them. If it is turned all the way the > wrong way it could possibly go subsonic. Take a look. it should be very > obvious if you have one. > > On Tue, Aug 23, 2011 at 7:00 AM, john.mcnamara65 <jfranmac@...> wrote: > > > ** > > > > > > Could you elaborate gino? > > > > > > --- In newmellotrongroup@yahoogroups.com, gino wong <wonggster@> wrote: > > > > > > Is it broken or tuned too low. The lf response on Crumar gear is pretty > > > impressive. > > > > > > On Sun, Aug 21, 2011 at 8:32 PM, john.mcnamara65 <jfranmac@> wrote: > > > > > > > ** > > > > > > > > > > > > Thanks for the info guys. I picked it up for $30. The 2 octave bass > > section > > > > does not work, and in fact when you switch the dial, it seems to power > > off > > > > the unit. Should be simple to fix i would guess. I plugged it into my > > Korg > > > > Pandora and have access to some drive and a better leslie sim than i > > > > expected. Looking forward to rocking out with this one. > > > > > > > > > > > > --- In newmellotrongroup@yahoogroups.com, "john.mcnamara65" <jfranmac@ > > > > > > > wrote: > > > > > > > > > > Anyone here have any wisdom for me on this instrument? I may be > > picking > > > > one up for $50. or less on sunday. My hope is that I can use it live as > > a > > > > substitute for a VST organ. Just to make things easier. > > > > > John Mc > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > Gino Wong Birgelo > > > *BSComm, BSEE & BS in general* > > > *Audio Production, Logistics, Synthesizers and sound design* > > > > > > *Ginowong@* > > > > > > > > > > > > > -- > > Gino Wong Birgelo > *BSComm, BSEE & BS in general* > *Audio Production, Logistics, Synthesizers and sound design* > > *Ginowong@...* >
Message
Re: Crumar T1
2011-08-23 by john.mcnamara65
Attachments
- No local attachments were found for this message.