The Mellotron Group

Oops, a little less because of the thickness of the support legs.


--- In newmellotrongroup@yahoogroups.com, "tron400" <tron400@...> wrote:
>
> Hi Mark,
> 
> It does look like the 18810 would work. I was confusing the max support width of just over 34 inches with the base width, which is a little over 41 inches. That leaves about 3.5 inches clearance on each side of the Mellotron cabinet.
> 
> Bernie
> 
> --- In newmellotrongroup@yahoogroups.com, "Mark J." <njoseph130@> wrote:
> >
> > Hello All;
> > 
> > Regarding a K&M tabletop keyboard stand, go to : hhtp://k-m.de/us and 
> > you should find what your looking for. Just click on their keyboard 
> > stands tab at top of page.
> > 
> > mellotronmk2(Mark)
> > 
> > 
> > -----Original Message-----
> > From: tron400 <tron400@>
> > To: newmellotrongroup <newmellotrongroup@yahoogroups.com>
> > Sent: Tue, Mar 13, 2012 2:21 pm
> > Subject: [newmellotrongroup] Re: Konig & Meyer 18810 Omega TABLE-STYLE 
> > KEYBOARD STAND
> > 
> > 
> > 
> > 
> > 
> > Hi Robert,
> > 
> > As it turns out, Music Stands Alone is about a 1/2 hour drive from my 
> > house. I'll call them to see if they have a storefront.
> > 
> > Thanks again!
> > 
> > Bernie
> > 
> > --- In newmellotrongroup@yahoogroups.com, Robert <rmrmax@> wrote:
> > >
> > > Bernie,
> > >
> > > No, I don't know the town.  I believe this is a "mail order" outfit 
> > and they may not have a physical retail location ?  When I bought the 
> > stand and stacker (2nd tier) from Music Stands Alone, it was shipped 
> >  from an outfit called Connolly Music Company.  Maybe they are 
> > affiliated or Connolly is the USA distributor for K & M ?
> > >
> > > Robert
> > >
> > >
> > >
> > > ________________________________
> > >  From: tron400 <tron400@>
> > > To: newmellotrongroup@yahoogroups.com
> > > Sent: Tuesday, March 13, 2012 7:20 AM
> > > Subject: [newmellotrongroup] Re: Konig & Meyer 18810 Omega 
> > TABLE-STYLE KEYBOARD STAND
> > >
> > >
> > >  
> > > Hi Robert,
> > >
> > > Thanks for this info. 203 is a Connecticut exchange. Do you know the 
> > town?
> > >
> > > Width is 33 7/8 inches.
> > >
> > > Bernie
> > >
> > > --- In newmellotrongroup@yahoogroups.com, Robert <rmrmax@> wrote:
> > > >
> > > > Hi Bernie,
> > > >
> > > > I have one of these table style keyboard stands and it might work 
> > for you ?  The price is approximately $175.  You can buy the 
> > optional stacker for approximately $110.
> > > >
> > > > I am not sure if it is wide enough to slide your Mellotron in 
> > between the legs.  Could you please measure the outer most width of 
> > your tron and I will take measurements.
> > > >
> > > > There is a Konig & Meyer video on YouTube for this stand.
> > > >
> > > >
> > > > I believe this stand is manufactured in Germany ?  I think it is 
> > a high quality stand and is very stable.
> > > >
> > > > I bought it from a company called "Music Stands Alone" in the 
> > USA.  Their phone number is 203-988-8600.  I was assisted by 
> > Thomas Esposito, who I found to be very helpful and a real nice guy.
> > > >
> > > > Best Regards,
> > > >
> > > > Robert
> > > >
> > > >
> > > >
> > > > ________________________________
> > > >  From: tron400 <tron400@>
> > > > To: newmellotrongroup@yahoogroups.com
> > > > Sent: Monday, March 12, 2012 2:05 PM
> > > > Subject: [newmellotrongroup] Keyboard Stand
> > > >
> > > >
> > > >  
> > > > Anyone here familiar with the OnStage KS-7902 2-tier A-frame 
> > keyboard stand? I'm wondering if it could hold a Hammond XK3 on the 
> > bottom tier and a Korg M3-61 on the top tier while straddling an M400 + 
> > 2 inches. There's a horizontal crossbar on the back that would be in 
> > the way unless it could be moved to the bottom or moved up above the 
> > top of the Tron, but I'm concerned with the stability.
> > > >
> > > > Bernie
> > > >
> > >
> >
>