The Mellotron Group

Hi Frank,

I have used WD40 on making pinchrollers spin again.
Once treated as such,will your way of cleaning them avoid any possible attraction of dirt?

Ta

H
-----Oorspronkelijk bericht -----
Van: lsf5275@aol.com
Aan: newmellotrongroup@yahoogroups.com; hessel@soundscape.nl
Verzonden: 24-11-07 22:42
Onderwerp: Re: [newmellotrongroup] Alcohol / Pinchrollers

If you must use alcohol, denatured alcohol works fine. Oiling pinch rollers  
is a temporary fix, at best. Oil attracts dirt and the rollers eventually 
stick  again. I usually pop the roller out of the key spring (carefully) and clean 
the  axle with a Dremel tool and a wire wheel. Then I clean and deburr the 
inside of  the hub until it spins freely on the axle. I then reinsert the axle 
and roller  into the spring. and re-peen the axle ends. This is a permanent 
fix. The roller  will never again require oil.
 
Frank II



**************************************Check out AOL's list of 2007's hottest 
products.
(http://money.aol.com/special/hot-products-2007?NCID=aoltop00030000000001)