The Mellotron Group

Hi John,

Any info is appreciated, thanks! I did a quick test print, and it looks like it might work. :) See attached photo.

If yours is broken, I’d be interested to have a photo of the inside. I have no idea how it actually was fixed on the switch. I see a little vertical slit, and then there’s sort of a round snap ring.

Ben





> On 25 Jul 2017, at 23:40, John Hammaren hammaren@geoconcepts.com <mailto:hammaren@geoconcepts.com> [newmellotrongroup] <newmellotrongroup@yahoogroups.com <mailto:newmellotrongroup@yahoogroups.com>> wrote:
> 
> 
> 
> Hi,
> I have had the same idea, but never got around to buying the printer yet. I will dig around for the pieces of mine that I think I saved for the exact purpose. Will forward info if I find something. In any case, please add me to the list. Rather than bust fingers turning on the switch I put it on a remote wall switch, but it would be nice to fix that issue. Thanks Ben
> John
>  
> From: newmellotrongroup@yahoogroups.com <mailto:newmellotrongroup@yahoogroups.com> [mailto:newmellotrongroup@yahoogroups.com <mailto:newmellotrongroup@yahoogroups.com>] 
> Sent: Sunday, July 23, 2017 12:48 PM
> To: newmellotrongroup@yahoogroups.com <mailto:newmellotrongroup@yahoogroups.com>
> Subject: [newmellotrongroup] 3d printed M400 power cap
>  
>   
> Hi,
> 
> I have found this really nice transparant red filament for my 3D printer, so I thought I’d have a go at printing a cap for my M400’s power switch.
> 
> Problem is obviously that I do not have the original cap. I’d greatly appreciate it if somebody could supply me with some close-up photo’s and/or dimensions.
> 
> Best regards,
> Ben
> 
> 
> 
>