Sounds to me like the V into the osc. isn't making it... Ed David Shoemaker wrote: > Hi everyone, > > I took delivery on my ARP Pro Soloist today. I knew it would need > repairs when I bought it, and here's what I've discovered so far. I > would really appreciate any suggestions on the next diagnostic/repair > steps. I have a hunch this is not going to be that complicated. > (crossing fingers) > > Here's the problem: It powers up correctly. Every key triggers a > sound, but the pitch does not change from key to key. The sound it > *does* make is a very low cycle tone, much lower than any keyboard > should make. It does not seem to be an LFO, because: The pitch > changes in octaves (roughly) as I move the octave shift lever. Of > course, the pitch is so low to start with that the "normal" and "low" > octave settings are just clicks. The pitch does NOT change, as far as > I can tell, when I adjust the tuning trimpot, nor does it respond to > the front panel tune "knob". > > The preset switches DO change the timbre of the sound, as if the > filters are working correctly. The volume slider works normally. The > "touch sensitivity" switches act as they should EXCEPT for the pitch > bend, and possibly the vibrato (hard to tell with such a low pitch > though). Portamento does NOT seem to work. > > The presets I would expect to be in a lower octave seem to be so, e.g. > "Bass", "Tuba". > > What I've done so far: > > --I replaced the aluminum caps in the power supply, and the output from > the power supply is normal. > --I very carefully cleaned all the oxidation off the J-wires and the > contact bar. Key triggering is almost perfect as far as I can tell. > > Can anyone offer any suggestions? I have a couple sources for spare > parts if I need them--I'm just not sure what to test/fix next. > > Thanks very much, > David Shoemaker > > > Yahoo! Groups Sponsor > ADVERTISEMENT > Click to learn more... > <http://rd.yahoo.com/M=243273.4089246.5300282.1261774/D=egroupweb/S=1705032144:HM/A=1750744/R=0/SIG=129p72mst/*http://servedby.advertising.com/click/site=552006/bnum=1067445531051785> > > > > To unsubscribe from this group, send an email to: > oldsynths-unsubscribe@yahoogroups.com > > > > Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service > <http://docs.yahoo.com/info/terms/>.
Message
Re: [oldsynths] ARP Pro Soloist tech question
2003-10-29 by Ed Edelenbos
Attachments
- No local attachments were found for this message.