Octave SRM CAT... VCO2 problems
2005-05-09 by oxygeno1313
Hi, this time i have another problem with the CAT ... the VCO 2 it's dead. It was working well, but now no sound. I trace the VCO 2 waveforms, but no waveform its working, i could see a bad SAW waveform comming form the CA3046 (pin 11). The CA3140 it's too hot, i check the TEMPCO 2k resistors and they are fine. I replaced the CA3046 and CA3140 and other releated components from the VCO 2 but nothing works. Anyone had experieced this problem ? I really need your help guys. Best Regards, P.D. If someone can take a look at the schematic here's a good link. http://www.synthdiy.com/show/showproduct.asp?show=205 (COMPLETE SERVICE MANUAL) or http://www.synthfool.com/cat1.html (SCHEMATICS ONLY)