Discussion about the Korg PolySix synthesizer

Hi Arturo,

What they mean by this is that they only want a certain amount of DC to be
present at the audio line out jack when you switch the P6 on. This is the
Œthump¹ you hear when you hit the mains switch. In this case they are
advising that not more than 6vdc peak ­ peak is present. You¹ll have to
measure a transient like that with a storage scope, unless anyone else out
there has a better idea. I shouldn¹t get too hung up about it unless your
speakers pop out and start rolling around on the floor.

Cheers,
Andy


On 24/02/2011 03:05, "Arturo B" <arturo00@hotmail.com> wrote:

>  
>  
>  
>    
> 
> 
> So, I have three KLM-367 clone boards finished and working well. Now onto
> calibration...
> 
> [Back story you can skip]  I decided to assemble them and get them all working
> adequately before I started the calibrating stage. Now, this isn't the first
> time I've done a calibration on the new boards. I tried a partial calibration
> few months back when I got my first board up and running, but part way through
> I decided to stop and wait until I had all the boards done. The process was,
> how shall I put this politely, infuriating(!) as the instructions were vague
> at best with things lost in translation and perhaps a few assumptions made by
> the manual author on the tech/person doing the calibrations and their
> experience/knowledge.
> 
> Now that I'm heading back into calibration mode, I was wondering if any of you
> guys have a plain English interpretation of the instructions. Something a
> little more thorough, and less... Engrish.
> 
> One of the first things I'm having trouble figuring out is what the heck is DC
> Click Noise (Step 7)? And where the heck do I read this from? The Main out? A
> test point? If so, which one? How important is this step?
> 
> I'm just starting out so there might be a bunch more questions down the line.
> Figured I'd start with this one.
> 
> Thanks in advance. And thanks again to Andy for helping me get through the
> assembly and subsequent troubleshooting. You da man!
> 
> Arturo....
> 
> ============================================
> Arturo Brisindi
> 
> [Musics]
> 
> mydadvsyours.com  |  soundcloud.com/arturo00
> 
> [Studios]
> 
> galleryrecording.weebly.com  |  arturo00.weebly.com
> 
>       
> 
> [Non-text portions of this message have been removed]
> 
>  
>    
> 
> 



[Non-text portions of this message have been removed]