Discussion about the Korg PolySix synthesizer

The ARP in the P6 works like this. On note is played and continues
to sound until the next note is trigerred or the ARP is switched off.

If you want to end the note earlier you have to program an EG on
the VCA and/or VCF to fade out the sound.

There is no difference in internal/external triggering. The only thing
that's happening when you connect a plug into the ARP Trig In jack is
that the internal oscillator (a 555 timer btw) is diconnected and
the signal from the external source is used to advance the ARP.
I cannot tell it from my head, but I'm pretty sure that the input
is of the switch-to-GND type and has a pullup resistor.

You also can use a footswitch (normally open) to advance the ARP.



Ken Leonard <ken@kleonard.com> wrote:
> 
> Hey folks!
> 
> Just wondering what the best settings would be for "Gate from Notes"
> in a Kenton Pro2000's AUX channels to trigger the P6's arpeggiator.
> 
> I think I have it set for +5 pull-up, but somehow I don't think that's
> right.  It does work, but the last note played is left sustaining when 
> I turn off the sequencer firing the MIDI out the Kenton.  Or does the
> arp work that way in the PolySix when remotely triggered?
> 
> ...kl...
> * Ken Leonard - http://www.kleonard.com << Home Page, Tunes Page
> * Get Outdoors New England - http://www.gonewengland.org
> 
> 
> To unsubscribe from this group, send an email to:
> PolySix-unsubscribe@egroups.com
> 
> PolySix "Digiest" Page: http://www.ing.umu.se/~me96kus/p6digi.html
> 
> 
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/