Discussion about the Korg PolySix synthesizer

I don't know exactly, but I'll give an educated guess:

  There are 16 bytes per patch.  Presuming the bytes are stored in RAM in 
their hardware address order, you have:

  1st byte: Effect Speed/Intensity knob
  2nd byte: Filter Fc knob
  3rd byte: Filter EG intensity knob
  4th byte: Filter Q (resonance) knob
  5th byte: Attack knob
  6th byte: Decay knob
  7th byte: Sustain knob
  8th byte: Release knob
  9th byte: Filter keyboard tracking knob
 10th byte: PW/PWM knob
 11th byte: PWM speed knob
 12th byte: MG (LFO) speed knob
 13th byte: MG delay knob
 14th byte: MG level knob

 15th byte: switch bits for VCO oct (2 bits), waveform (2 bits),
            subosc mode (2 bits) and MG destination (2 bits).

 16th byte: switch bits for EG VCA mode (1 bit), effect mode (2 bits),
            attenuator (4 bits).

  I don't know exactly which bit values mean which setting for the
switches.  Best way to figure that out is just a little trial and error.

  The 14 knob values are at 8-bit resolution.

  Hope this helps,

Crow
/**/

On Mon, 8 Sep 2003, Riccardo (Oggi) wrote:

> Crow, thanks to your info, generating a WAV encoding P6 parameters is no
> longer a problem.
> 
> But now I miss another couple of things:
> 1) parameter sequence: which comes first, which second etc. etc.
> 2) parameter values range.
> 
> Can you help me on this too?