Discussion about the Korg PolySix synthesizer

Got it.  The code checks for a diode to see which synth it's 
running in.   Guess I need to use that to change the MIDI 
numbers a little for the MP.   I will work on that when the 
need arises.
    Bob

      From: "klosmon klosmon@sbcglobal.net [PolySix]" <PolySix@yahoogroups.com>
 To: PolySix@yahoogroups.com 
 Sent: Saturday, April 18, 2015 5:07 PM
 Subject: Re: [PolySix] Low cost note-on/off MIDI for PolySix
   
    Well, cool.
Will send $30 today.

Regarding Polysix MIDI used on the Monopoly -- I've attached other MIDI 
key assigner boards from the P6 to the MP; one issue to be dealt with 
is the fact that the Monopoly keyboard starts on F, rather than C.

~GMM

On 4/18/2015 1:36 PM, Bob Grieb bobgrieb@yahoo.com [PolySix] wrote:
> Hello Group,
>
> I designed a small pc bd that plugs in in place of the PolySix key 
> assigner
> and adds MIDI note on and note off. It can also trigger the 
> arpeggiator using MIDI clk
> with various divide rates. MIDI channel and divide rate are set by 
> holding down a key
> at power up, and are saved in EEPROM. No other features are added. 
> No MIDI output
> is provided by my design.
>
> If anyone is interested, I can supply either a pc bd, or a pc bd 
> and a programmed PIC
> chip if you want to build one. I don't plan to offer assembled 
> boards. The pc bd plus
> programmed PIC chip is $27 + $3 S&H to USA addresses. The other 
> parts to build up
> a board would cost another $10 or so, plus S&H from your supplier.
>
> I actually have two versions, one for the PolySix and one for the 
> Poly61, since they used
> the same key assigner MCU. I think it should also work in the 
> MonoPoly, but I have no way
> to test that.
>
> Bob Grieb
>
>
>
>