Discussion about the Korg PolySix synthesizer group photo

Yahoo Groups archive

Discussion about the Korg PolySix synthesizer

Index last updated: 2026-04-28 23:40 UTC

Message

Re: [PolySix] KLM-366B Replacement

2015-12-16 by atoneontail@gmail.com

Thanks to everyone for their responses thus far, I am kind of relieved to hear it might be the tech. But after closer inspection myself, it does appear there is some corrosion on the voice board. Under the specific voice that is not working, Voice 4.

To answer your questions Don:

- The LFO to VCO and Pitch Bend not functioning is affecting all Voices

-The Tech said he did not fix anything

-He specifically mentioned a trace missing/pulled from the KLM-369 board, but later mentioned he noticed a bunch had been pulled.

-He said he noticed the corrosion on the back of the KLM-366B board, specifically around Voice 4, the one that is not sounding. In a closer inspection, I noticed what could be corrosion, but I am no expert.

The picture attached is an image of the KLM-366B board, notice R136.




Attachments

  • No local attachments were found for this message.

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.