Discussion about the Korg PolySix synthesizer group photo

Yahoo Groups archive

Discussion about the Korg PolySix synthesizer

Index last updated: 2026-04-28 23:40 UTC

Message

Re: [PolySix] Where to start on calibration?

2005-02-17 by glocka respirator

Every 6th note on my Polysix sounds really buzzy, you can make a smooth sounding pad but evry 6th note sounds like you've turned the VCF Frequency right up. I don't know anything about fixing it though, sorry.

rallyboypdx <blaker@mac.com> wrote:
I have a PolySix that is in great shape, except that the 6 synths are out of whack.  That is, 
you get a different sound each time you hit the same key.  I tried to make it louder a little 
while back, and ended up adjusting the wrong pots.  After downloading the PolySix service 
manual and trying out a few things, I'm stuck with a screwed-up synth.

I have an auto-ranging digital voltmeter and found a pretty good oscilliscope app 
(SignalScope) for the Mac.  From what I can tell, though, I'll need a real scope that I can 
connect to the circuits.  Is that correct, or can I just use the output from the 1/4 inch 
signal out jack?  Also, it appears I need a "dummy 56Kohm 2-pin connector"--what is 
that, exactly, and where is the KLM-376 2P plug?  I see a few plugs on that board but none 
with 2 pins.

I haven't done a lot of electronics work, beyond putting PCs together and a botched 
attempted to build a stomp-box, but I'm a reasonably smart guy and I love messing 
around with stuff.   Would I be getting in over my head to try to calibrate this PolySix?  
Would the cost of getting it repaired be less than the cost of a scope?

Thanks for any advice.

DGB





PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6 


Yahoo! Groups SponsorADVERTISEMENT
document.write('');

---------------------------------
Yahoo! Groups Links

   To visit your group on the web, go to:
http://groups.yahoo.com/group/PolySix/
  
   To unsubscribe from this group, send an email to:
PolySix-unsubscribe@yahoogroups.com
  
   Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 



		
---------------------------------
 ALL-NEW Yahoo! Messenger - all new features - even more fun!  

[Non-text portions of this message have been removed]

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.