Discussion about the Korg PolySix synthesizer

Hi

I was wondering if anyone has a datasheet or pinout for the PC-1 optocoupler, i'm thinking mine is broken but i can't verify it as i can't really discern the pinout from the schematics.

Thanks!

Karl


      __________________________________________________________
Låna pengar utan säkerhet. Jämför vilkor online hos Kelkoo.
http://www.kelkoo.se/c-100390123-lan-utan-sakerhet.html?partnerId=96915014

Hi,

 

It’s a Hamamatsu P1501 Dip 5 opto-coupler device. Try here
http://www.chinadatasheet.com/download.asp?id=1376323_852681. This device is
older than the hills and probably obsolete. The resistance across pins 4 and
6 should drop as the voltage across pins 1 and 2 increases (I think!!!).

 

Cheers,

Andy

From: PolySix@yahoogroups.com [mailto:PolySix@yahoogroups.com] On Behalf Of
Karl Ekdahl
Sent: 20 October 2009 16:05
To: PolySix@yahoogroups.com
Subject: [PolySix] PC-1 Optocoupler question

 

  

Hi

I was wondering if anyone has a datasheet or pinout for the PC-1
optocoupler, i'm thinking mine is broken but i can't verify it as i can't
really discern the pinout from the schematics.

Thanks!

Karl

__________________________________________________________
Låna pengar utan säkerhet. Jämför vilkor online hos Kelkoo.
http://www.kelkoo.se/c-100390123-lan-utan-sakerhet.html?partnerId=96915014





[Non-text portions of this message have been removed]