Sequential circuits samplers

Can you use just about any standard PC floopy drive ?




--- In prophet2000@yahoogroups.com, Chase Smith <plus_321@...> wrote:
>
> If you don't have the obvious drive select jumpers, then check the
pcb for a surface mount piece labeled DS0/DS1 and switch it from DS1
to DS0.
> 
> It is a very small piece, but I have done it with this same floppy.
> 
> Good luck.
> 
> tomkah <tomkah@...> wrote: im having some trouble replacing the
drive on my 2002
> i bought a teac fd-2235hf and read the post by someone who added a
> couple jumpers and got it to work
> im confused as to exactly where those jumpers go?
> is it on the pins that the ribbon cable connects to?
> when i place a jumper on those pins, then im no longer able
> to fit the ribbon cable connector back on (the jumper stops it)
> and lastly, is the ribbon connection the only one i have to make?
> its the only thing that was connected to the original drive i took out,
> but i see references in other posts to a 'power' connection also
> many thanks to anyone who can help
> -tom
> 
> 
> 
>  
> Yahoo! Groups Links
> 
> 
> 
> 
> 
>        
> ---------------------------------
> Be a better friend, newshound, and know-it-all with Yahoo! Mobile. 
Try it now.
>