Sequential circuits samplers

> Hello
> i'm going to buy a P3000 and would like to test the SCSI as the actual
owner
> never used it.
> i will come at his place with an external HD.
> i downloaded the manual but couldn't find anything about SCSI
> http://prophet3000.fr.st/
>
> could someone help me?
> David, maybe you will remember the procedure ?
> best regards, Oliver
>
>
>
> ----- Original Message -----
> From: "David Evans" <dfevans@...>
> To: "SCI Sampler Mailing List" <prophet@...>
> Sent: Wednesday, May 09, 2001 4:00 PM
> Subject: FS: Prophet 3000
>
>
> >   Andromeda on its way; P3k has to go.
> >
> >   It's the 2MB version and is in very good condition: some small
scratches
> > on the controller and a little gunk near the edges of the display.
> > Disassembly of the controller and a little cleaning would deal with
that.
> > The display backlight is basically dead (which is pretty common).
> >
> >   Comes with various sample disks plus a 100MB SCSI hard disk with some
> > stuff on it.  OSes included are Squential 3.0B (works fine with above
SCSI
> > disk), WCP 1.6B (never used it) and many flavours of 2.x that I never
use.
> > Also have the manual in that nifty Squential binder.  I'll throw in a
bag

> > of crimp connectors for the controller cable if you like.
> >
> >   Asking $1000 Canadian (about $630 US) plus shipping.
> >
> > --
> > David Evans          (NeXTMail/MIME OK)
> dfevans@...
> > PhD Student, Computer/Synth Junkie
> http://bbcr.uwaterloo.ca/~dfevans/
> > University of Waterloo         "Default is the value selected by the
> composer
> > Ontario, Canada           overridden by your command." - Roland TR-707
> Manual
>

make sure that you use a relatively small HD (i think 450 megs is the largest
it will support), and that it is preformatted for a _mac_.
you shouldn't have too many problems then.

you go to the disk menu, go up to 'floppy', then turn the wheel
to select a scsi device. pretty straightforward from there.

corley brigman
intel corp.
corley.brigman@...

-----Original Message-----
From: Olivier HUG [mailto:olivier.hug@...]
Sent: Wednesday, February 12, 2003 8:19 PM
To: prophet2000@yahoogroups.com
Subject: [prophet2000] Re: Prophet 3000





> Hello
> i'm going to buy a P3000 and would like to test the SCSI as the actual
owner
> never used it.
> i will come at his place with an external HD.
> i downloaded the manual but couldn't find anything about SCSI
> http://prophet3000.fr.st/
>
> could someone help me?
> David, maybe you will remember the procedure ?
> best regards, Oliver
>
>
>
> ----- Original Message -----
> From: "David Evans" <dfevans@...erloo.ca>
> To: "SCI Sampler Mailing List" <prophet@...>
> Sent: Wednesday, May 09, 2001 4:00 PM
> Subject: FS: Prophet 3000
>
>
> >   Andromeda on its way; P3k has to go.
> >
> >   It's the 2MB version and is in very good condition: some small
scratches
> > on the controller and a little gunk near the edges of the display.
> > Disassembly of the controller and a little cleaning would deal with
that.
> > The display backlight is basically dead (which is pretty common).
> >
> >   Comes with various sample disks plus a 100MB SCSI hard disk with some
> > stuff on it.  OSes included are Squential 3.0B (works fine with above
SCSI
> > disk), WCP 1.6B (never used it) and many flavours of 2.x that I never
use.
> > Also have the manual in that nifty Squential binder.  I'll throw in a
bag
> > of crimp connectors for the controller cable if you like.
> >
> >   Asking $1000 Canadian (about $630 US) plus shipping.
> >
> > --
> > David Evans          (NeXTMail/MIME OK)
> dfevans@...
> > PhD Student, Computer/Synth Junkie
> http://bbcr.uwaterloo.ca/~dfevans/
> > University of Waterloo         "Default is the value selected by the
> composer
> > Ontario, Canada           overridden by your command." - Roland TR-707
> Manual
>


To unsubscribe from this group, send an email to:
prophet2000-unsubscribe@yahoogroups.com

 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

thanks !
would a 105Mb syquest match ?
is there any SCSI ID to avoid ?


----- Original Message -----
From: "Brigman, Corley" <corley.brigman@...>
To: <prophet2000@yahoogroups.com>
Sent: Thursday, February 13, 2003 2:51 AM
Subject: RE: [prophet2000] Re: Prophet 3000


> make sure that you use a relatively small HD (i think 450 megs is the
largest

> it will support), and that it is preformatted for a _mac_.
> you shouldn't have too many problems then.
>
> you go to the disk menu, go up to 'floppy', then turn the wheel
> to select a scsi device. pretty straightforward from there.
>
> corley brigman
> intel corp.
> corley.brigman@...
>
>
> -----Original Message-----
> From: Olivier HUG [mailto:olivier.hug@...]
> Sent: Wednesday, February 12, 2003 8:19 PM
> To: prophet2000@yahoogroups.com
> Subject: [prophet2000] Re: Prophet 3000
>
>
>
>
>
> > Hello
> > i'm going to buy a P3000 and would like to test the SCSI as the actual
> owner
> > never used it.
> > i will come at his place with an external HD.
> > i downloaded the manual but couldn't find anything about SCSI
> > http://prophet3000.fr.st/
> >
> > could someone help me?
> > David, maybe you will remember the procedure ?
> > best regards, Oliver
> >
> >

>would a 105Mb syquest match ?
>is there any SCSI ID to avoid ?

i think it uses scsi id 7 (like most macs?)
i haven't tried the syquest 105s, but i have
used the 200, 88s, and 44s with no issues.

incidentally, i don't have my p3000 anymore...
i still have a syquest 88 drive with several
88 meg carts and a whole bunch of 44s... anyone
want it? make an offer...

corley brigman
intel corp.
corley.brigman@...

i have a Prophet 3000 Rev B with 4 megs of ram.  i replaced the LCD screen with a blue 
backlit screen which looks great.  if anyone needs info on this mod i'd be happy to help out.

my pk3 has a couple of issues and i was wondering if anybody could help out.  

the first problem is that as the unit plays through the voices, each voice seems to have a 
slightly different filter setting.  it's most noticable when i turn the resonance up so the filters 
self oscillate.  i can very clearly hear the pitch of the self oscillation changing as i step 
through the voices.  any ideas what might be causing this?

the other issue occurs when i play drum sounds with a sharp attack.  the attack sounds 
different each time the sound is triggered.  it almost sounds like it's sometimes clipping the 
circuit and sometimes it's not, though i'm quite sure the sound is not clipping at all.  

i'm very familiar with the unit and have ruled out the possibilty of user settings for both 
issues.  i'm almost resigned to sending it to wine country but wanted to check here first.

thanks

nick

Hello, i would be pleased to get any information about the backlight replacement :) I have the service manual, i will check if there is any tuning procedure in

Hi Everyone, thanks for letting me join.

I'm looking for some Prophet 3000 stuff that used to be available for free on
the web, but the links are so old they are broken now.

If anyone has an image of the diagnostic disk, samples, or the service manual,
or anything else they would be happy to share, I would be very grateful.

Thanks
Martin

martin, I *think* I've got a hard copy of the manual somewhere. the schematics, that is. they were sent to me in error by an ebayist from whom I'd bought the corresponding p2000 sheets, & he didn't want them back. anyway, I'm in madrid for the next ten days & these docs are in london, but if I find them then, I'll let you know & we can arrange to get them to you.

duncan.

--- In prophet2000@yahoogroups.com, "cyllall" <cyllall@...> wrote:

>
> Hi Everyone, thanks for letting me join.
> 
> I'm looking for some Prophet 3000 stuff that used to be available for free on
> the web, but the links are so old they are broken now.
> 
> If anyone has an image of the diagnostic disk, samples, or the service manual,
> or anything else they would be happy to share, I would be very grateful.
> 
> Thanks
> Martin
>

Brill. Let me know if you find them Duncan.

Martin



________________________________
 From: duncan <ferrograph@...>
To: prophet2000@yahoogroups.com 
Sent: Wednesday, 20 June 2012, 22:15
Subject: [prophet2000] Re: Prophet 3000
 

  
martin, I *think* I've got a hard copy of the manual somewhere. the schematics, that is. they were sent to me in error by an ebayist from whom I'd bought the corresponding p2000 sheets, & he didn't want them back. anyway, I'm in madrid for the next ten days & these docs are in london, but if I find them then, I'll let you know & we can arrange to get them to you.

duncan.

--- In prophet2000@yahoogroups.com, "cyllall" <cyllall@...> wrote:

>
> Hi Everyone, thanks for letting me join.
> 
> I'm looking for some Prophet 3000 stuff that used to be available for free on
> the web, but the links are so old they are broken now.
> 
> If anyone has an image of the diagnostic disk, samples, or the service manual,
> or anything else they would be happy to share, I would be very grateful.
> 
> Thanks
> Martin
>

Hello all,

I have a prophet-3000 with no sound disks, they were all destroyed in a fire (the firemen saved the p-3k though) Does anyone have some that they could copy for me, I would pay for the disks and your time !! thanks so much!

later,
ben
..
email: b3nsf@...



--- In prophet2000@yahoogroups.com, "duncan" <ferrograph@...> wrote:

>
> martin, I *think* I've got a hard copy of the manual somewhere. the schematics, that is. they were sent to me in error by an ebayist from whom I'd bought the corresponding p2000 sheets, & he didn't want them back. anyway, I'm in madrid for the next ten days & these docs are in london, but if I find them then, I'll let you know & we can arrange to get them to you.
> 
> duncan.
> 
> --- In prophet2000@yahoogroups.com, "cyllall" <cyllall@> wrote:
> >
> > Hi Everyone, thanks for letting me join.
> > 
> > I'm looking for some Prophet 3000 stuff that used to be available for free on
> > the web, but the links are so old they are broken now.
> > 
> > If anyone has an image of the diagnostic disk, samples, or the service manual,
> > or anything else they would be happy to share, I would be very grateful.
> > 
> > Thanks
> > Martin
> >
>

Have you got an old Win98 computer ,what's the serial number on your Prophet,what revision is it/ram size, do you have any disks at all?

Martin



________________________________
 From: ben <b3nnysf@...>
To: prophet2000@yahoogroups.com 
Sent: Thursday, 21 June 2012, 16:17
Subject: [prophet2000] Re: Prophet 3000
 

  

Hello all,

I have a prophet-3000 with no sound disks, they were all destroyed in a fire (the firemen saved the p-3k though) Does anyone have some that they could copy for me, I would pay for the disks and your time !! thanks so much!

later,
ben
..
email: b3nsf@hotmail.com

--- In prophet2000@yahoogroups.com, "duncan" <ferrograph@...> wrote:

>
> martin, I *think* I've got a hard copy of the manual somewhere. the schematics, that is. they were sent to me in error by an ebayist from whom I'd bought the corresponding p2000 sheets, & he didn't want them back. anyway, I'm in madrid for the next ten days & these docs are in london, but if I find them then, I'll let you know & we can arrange to get them to you.
> 
> duncan.
> 
> --- In prophet2000@yahoogroups.com, "cyllall" <cyllall@> wrote:
> >
> > Hi Everyone, thanks for letting me join.
> > 
> > I'm looking for some Prophet 3000 stuff that used to be available for free on
> > the web, but the links are so old they are broken now.
> > 
> > If anyone has an image of the diagnostic disk, samples, or the service manual,
> > or anything else they would be happy to share, I would be very grateful.
> > 
> > Thanks
> > Martin
> >
>

Hello, 
here is a bunch of information from the archived version of the Gutelius site.
http://web.archive.org/web/20010303124221/http://jhunix.hcf.jhu.edu/~gutelius/prophet.html
unfortunatly, the diagnostic disc is not downloadable anymore.


--- In prophet2000@yahoogroups.com, "cyllall" <cyllall@...> wrote:

>
> Hi Everyone, thanks for letting me join.
> 
> I'm looking for some Prophet 3000 stuff that used to be available for free on
> the web, but the links are so old they are broken now.
> 
> If anyone has an image of the diagnostic disk, samples, or the service manual,
> or anything else they would be happy to share, I would be very grateful.
> 
> Thanks
> Martin
>

Hi,
All the download links on that site are now dead. It looks as if there was a lot more interesting stuff there at one time, but that site is still useful.


I have also seen some dead links to a French site too that looked interesting when it was up.

I will keep looking. Thanks for your help.

Martin



________________________________
 From: min.struct <min.struct@libertysurf.fr>
To: prophet2000@yahoogroups.com 
Sent: Monday, 25 June 2012, 13:47
Subject: [prophet2000] Re: Prophet 3000
 

  
Hello, 
here is a bunch of information from the archived version of the Gutelius site.
http://web.archive.org/web/20010303124221/http://jhunix.hcf.jhu.edu/~gutelius/prophet.html
unfortunatly, the diagnostic disc is not downloadable anymore.

--- In prophet2000@yahoogroups.com, "cyllall" <cyllall@...> wrote:

>
> Hi Everyone, thanks for letting me join.
> 
> I'm looking for some Prophet 3000 stuff that used to be available for free on
> the web, but the links are so old they are broken now.
> 
> If anyone has an image of the diagnostic disk, samples, or the service manual,
> or anything else they would be happy to share, I would be very grateful.
> 
> Thanks
> Martin
>

Ben, 
you can catch the OS disk here : 
http://machines.hyperreal.org/manufacturers/Sequential/Prophet-Samplers/info/sneppe/os.htm
and just 2 sound disk here : 
http://machines.hyperreal.org/manufacturers/Sequential/Prophet-Samplers/info/sneppe/disks.htm
if your paper manual has also burned, you can get the pdf version here : http://www.soundprogramming.net/manuals/SequentialCircuits_Prophet3000_Manual.pdf



--- In prophet2000@yahoogroups.com, "ben" <b3nnysf@...> wrote:

>
> 
> Hello all,
> 
> I have a prophet-3000 with no sound disks, they were all destroyed in a fire (the firemen saved the p-3k though) Does anyone have some that they could copy for me, I would pay for the disks and your time !! thanks so much!
> 
> later,
> ben
> ..
> email: b3nsf@...
> 
> 
> 
> --- In prophet2000@yahoogroups.com, "duncan" <ferrograph@> wrote:
> >
> > martin, I *think* I've got a hard copy of the manual somewhere. the schematics, that is. they were sent to me in error by an ebayist from whom I'd bought the corresponding p2000 sheets, & he didn't want them back. anyway, I'm in madrid for the next ten days & these docs are in london, but if I find them then, I'll let you know & we can arrange to get them to you.
> > 
> > duncan.
> > 
> > --- In prophet2000@yahoogroups.com, "cyllall" <cyllall@> wrote:
> > >
> > > Hi Everyone, thanks for letting me join.
> > > 
> > > I'm looking for some Prophet 3000 stuff that used to be available for free on
> > > the web, but the links are so old they are broken now.
> > > 
> > > If anyone has an image of the diagnostic disk, samples, or the service manual,
> > > or anything else they would be happy to share, I would be very grateful.
> > > 
> > > Thanks
> > > Martin
> > >
> >
>

martin-

I have the service sheets, hard-copy.

it's about three dozen sheets of A4. let me know where you are & I'll sort out posting it.

duncan.

--- In prophet2000@yahoogroups.com, Martin Ator <cyllall@...> wrote:

>
> Brill. Let me know if you find them Duncan.
> 
> Martin