Vintage Synth Repair

Thanks for replies! 


The closest examples I can find are:

Mouser

http://fi.mouser.com/ProductDetail/Bourns/3352W-1-502LF/?qs=sGAEpiMZZMukHu%252bjC5l7YRWi3dhnqk2ri7HLKJF9JEQ%3d

RS

http://uk.rs-online.com/web/search/searchBrowseAction.html?method=getProduct&R=0473530

http://uk.rs-online.com/web/search/searchBrowseAction.html?method=getProduct&R=1831445

http://uk.rs-online.com/web/search/searchBrowseAction.html?method=getProduct&R=5222889


All the above have 2 or 3 pins. The pots in the Micromoog have 4 pins.
However, 1 or 2 appear to be for mounting. I noticed some pins are
soldered to pads that are not part of circuit... My guess is I can 
make the above examples work as long as the specs are same 
and the correct pins can be attached to board...

Are the Minimoog type similar to above examples?

-Allan



--- In vintagesynthrepair@yahoogroups.com, "Brian" <brian@...> wrote:
>
> Hi Allan
> 
>  
> 
> If these are similar to those used in the Minimoog then you can find
> replacements within the RS Components catalogue.
> 
>  
> 
> Regards
> 
> Brian G3OYU
> 
>  
> 
> From: vintagesynthrepair@yahoogroups.com
> [mailto:vintagesynthrepair@yahoogroups.com] On Behalf Of mlcsixand78s
> Sent: 18 January 2010 10:47
> To: vintagesynthrepair@yahoogroups.com
> Subject: [vintagesynthrepair] Resistor trim pots for Micromoog (need to find
> replacements)
> 
>  
> 
>   
> 
> Hello, 
> 
> I hope someone can help.
> 
> I'm in search of new replacement RESISTOR TRIM POTS for my Micromoog.
> (example 1K, 10K, 100K, etc).
> 
> I have had problems tuning it and someone suggested to me a
> while back (by e-mail)that replacing the trim pots should help.
> I was suggested to order from some "standard" online electornics 
> supply store...but I forgot the name of the place.
> 
> The trim pots are the ones mounted on main board and are about 
> 10mm x 10mm in size with a plastic tuning wheel plus 4 circuit 
> board mounting pins. 
> 
> Any ideas?
> 
> Br
> Allan
>