Vintage Synth Repair

Thanks Robert,
 
Can you tell me anymore about these?  I'm a bit confused as too whether they will take care of the -15 voltage regulator problem in the omni 2.  Do they bypass the regulator or something.  Is their a special procedure to hook them up?
 
Thanks,
Ed
________________________________________________________________________
________________________________________________________________________

Message: 1
Date: Mon, 1 Sep 2003 11:31:40 -0700 (PDT)

From: Robert Benchic 
Subject: Re: another broken omni 2

Ed, 

Just replace the supply with a Lambda, power one or
similar linear dual 15 volt 500ma to 1A type. You can
find one at any of the large electronics suppliers or
I have even seen them on ebay. 

-Bob

--- Ed Hallborg wrote:
> Does anyone know of a vintage keys tech in the
> Buffalo-Toronto-Syracuse-Pittsburgh area? I have a
> omni 2 w/ a bad power supply- It needs one of the
> voltage regulators replaced and I can't find a
> source for it. I'm hoping someone might be able to
> design an alternate method of powering the Arp. 
> Aside from the psu, it looks mint and I got it at a
> good price (free) - so it may be worth saving. Any
> help appreciated.
> 
> Regards,
> Ed
> 
> vintagesynthrepair@yahoogroups.com wrote:
> 
> To unsubscribe from this group, send an email to:
> vintagesynthrepair-unsubscribe@egroups.com
> 
> 
>
------------------------------------------------------------------------
> 
> There are 5 messages in this issue.
> 
> Topics in this digest:
> 
> 1. RE: Help for someone new to Organs
> From: "Keith Niver" 
> 2. Is this a handjob or a blowjob?
> From: "julie_bells276" 
> 3. Various IC : SSM & CEM on Ebay !!!!! 25 IC :
> Strating Price : 1 euro !!!!
> From: "Alexandre" 
> 4. She has sexy feet
> From: "julie_bells276" 
> 5. Recent spam
> From: AlanP 
> 
> 
>
________________________________________________________________________
>
________________________________________________________________________
> 
> Message: 1
> Date: Thu, 28 Aug 2003 17:04:04 -0400
> From: "Keith Niver" 
> Subject: RE: Help for someone new to Organs
> 
> It was made about 1958-59. Should have a rack of
> chord buttons on the left
> side and spectra tone. This model was the first
> series of electronic organs
> made by Wurlitzer after the reed organs. A ton of
> them were sold. If you
> intend to keep it you should have the power supply
> checked and probably new
> filters installed. We were a Wurlitzer dealer at the
> time these organs were
> introduced.
> 
> Keith Niver
> Master Certified Wurlitzer Tech
> 
> -----Original Message-----
> From: tom_and_renae [mailto:tom_and_renae@...]
> 
> Sent: Thursday, August 28, 2003 1:02 PM
> To: vintagesynthrepair@yahoogroups.com
> Subject: [vintagesynthrepair] Help for someone new
> to Organs
> 
> 
> I recently acquired an older Wurlitzer Organ in
> excellent condition. 
> I'm seeking information about its origins... 
> It is a model 4150BW with a serial number of 687039.
> Does anyone have 
> sources or advice for me to find further
> information? I have tried 
> some basic internet searches, but have had little
> luck with that 
> particular model.
> Let me know.
> 
> Thanks,
> Tom 
> 
> 
> 
> 
> 
> 
>
________________________________________________________________________
>
________________________________________________________________________
> 
> Message: 2
> Date: Fri, 29 Aug 2003 03:18:43 -0000
> From: "julie_bells276" 
> Subject: Is this a handjob or a blowjob?
> 
> Does your woman mistake a handjob for a blowjob and
> give you lousy head with no wet mouth action?
> When I need a woman that sucks cock like a pro I go
> here.
> 
> http://www.casualsexads.net/landing.asp?afl=NYHO
> 
> 
> 
>
________________________________________________________________________
>
________________________________________________________________________
> 
> Message: 3
> Date: Fri, 29 Aug 2003 10:22:00 +0200
> From: "Alexandre" 
> Subject: Various IC : SSM & CEM on Ebay !!!!! 25 IC
> : Strating Price : 1 euro !!!!
> 
> Hi !
> 
> I've just put an auction on www.ebay.fr
> 
>
http://cgi.ebay.fr/ws/eBayISAPI.dll?ViewItem&category=17401&item=2554677417
> 
> Vends lot de :
> 
> Selling various IC :
> 
> SSM and CEM Chips (25 pces)
> 
> Id\ufffdal si votre vintage a perdu une voix ou si votre
> filtre s'en est all\ufffd..
> 
> Kit de survie tr\ufffds utile pour tout amateur
> d'analogique.
> 
> Vente du lot uniquement : PAS DE VENTE AU DETAIL.
> Liste SSM et CEM :
> 
> 2 X CEM 3360 (VCA Moog, Sequential...)
> 5 X SSM 2056 (Korg Polysix, Poly61....)
> 6 X SSM 2024 (Opera 6....)
> 6 X SSM 2044 (VCF PPG, Korg Monopoly, Polysix....)
> 4 X SM 8352
> 2 X SM 8337
> 
> Seuls les 3360 sont neuf (jamais utilis\ufffds). Les
> autres sont des 2\ufffdmes mains,
> mais ont \ufffdt\ufffd t\ufffdst\ufffds et fonctionnent parfaitement.
> 
> The 3360 are NEW. The others are 2nd hand, but have
> been tested and works
> very well.
> 
> Pour plus de d\ufffdtails :
> 
> For more details :
> 
> 
> http://www.synthtech.com/cem/cemsynth.html
> 
> Cheers,
> 
> Alexandre
> 
> 
> 
> 
> 
> 
> 
>
________________________________________________________________________
>
________________________________________________________________________
> 
> Message: 4
> Date: Fri, 29 Aug 2003 12:33:50 -0000
> From: "julie_bells276" 
> Subject: She has sexy feet
> 
> I met this girl last week and she has the hottest
> feet i have ever seen! Here is the spot we hooked up
> Click Below.
>
http://www.123adultpersonals.net/landing.asp?afl=NYHO
> 
> 
> 
>
________________________________________________________________________
>
________________________________________________________________________
> 
> Message: 5
> Date: Sat, 30 Aug 2003 00:40:20 +1200
> From: AlanP 
> Subject: Recent spam
> 
> Can the list owner please set this list to
> members-can-post-only ? That
> should fix the spam.
> 
> --
> Alan Podjursky ICQ 24423014
> "Yay, evil evil! Happy torture!" -- Gwyneth
> "When in doubt, use brute force." -- Ken Thompson
> http://www.fanfiction.net/~mercva
> 
=== message truncated ===


__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com


________________________________________________________________________
________________________________________________________________________



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ 




---------------------------------
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software

Ed, 

You would be replacing the entire power supply
eliminating the need to repair the regulator in the
original. The connections would be easy, positive and
negative 15 volts DC with a common ground and 115
volts AC. I can find you a supplier and appropriate
model if you like. 

-Bob


--- Ed Hallborg <ehallborg@...> wrote:
> Thanks Robert,
>  
> Can you tell me anymore about these?  I'm a bit
> confused as too whether they will take care of the
> -15 voltage regulator problem in the omni 2.  Do
> they bypass the regulator or something.  Is their a
> special procedure to hook them up?
>  
> Thanks,
> Ed
>
________________________________________________________________________
>
________________________________________________________________________
> 
> Message: 1
> Date: Mon, 1 Sep 2003 11:31:40 -0700 (PDT)
> From: Robert Benchic 
> Subject: Re: another broken omni 2
> 
> Ed, 
> 
> Just replace the supply with a Lambda, power one or
> similar linear dual 15 volt 500ma to 1A type. You
> can
> find one at any of the large electronics suppliers
> or
> I have even seen them on ebay. 
> 
> -Bob
> 
> --- Ed Hallborg wrote:
> > Does anyone know of a vintage keys tech in the
> > Buffalo-Toronto-Syracuse-Pittsburgh area? I have a
> > omni 2 w/ a bad power supply- It needs one of the
> > voltage regulators replaced and I can't find a
> > source for it. I'm hoping someone might be able to
> > design an alternate method of powering the Arp. 
> > Aside from the psu, it looks mint and I got it at
> a
> > good price (free) - so it may be worth saving. Any
> > help appreciated.
> > 
> > Regards,
> > Ed
> > 
> > vintagesynthrepair@yahoogroups.com wrote:
> > 
> > To unsubscribe from this group, send an email to:
> > vintagesynthrepair-unsubscribe@egroups.com
> > 
> > 
> >
>
------------------------------------------------------------------------
> > 
> > There are 5 messages in this issue.
> > 
> > Topics in this digest:
> > 
> > 1. RE: Help for someone new to Organs
> > From: "Keith Niver" 
> > 2. Is this a handjob or a blowjob?
> > From: "julie_bells276" 
> > 3. Various IC : SSM & CEM on Ebay !!!!! 25 IC :
> > Strating Price : 1 euro !!!!
> > From: "Alexandre" 
> > 4. She has sexy feet
> > From: "julie_bells276" 
> > 5. Recent spam
> > From: AlanP 
> > 
> > 
> >
>
________________________________________________________________________
> >
>
________________________________________________________________________
> > 
> > Message: 1
> > Date: Thu, 28 Aug 2003 17:04:04 -0400
> > From: "Keith Niver" 
> > Subject: RE: Help for someone new to Organs
> > 
> > It was made about 1958-59. Should have a rack of
> > chord buttons on the left
> > side and spectra tone. This model was the first
> > series of electronic organs
> > made by Wurlitzer after the reed organs. A ton of
> > them were sold. If you
> > intend to keep it you should have the power supply
> > checked and probably new
> > filters installed. We were a Wurlitzer dealer at
> the
> > time these organs were
> > introduced.
> > 
> > Keith Niver
> > Master Certified Wurlitzer Tech
> > 
> > -----Original Message-----
> > From: tom_and_renae
> [mailto:tom_and_renae@...]
> > 
> > Sent: Thursday, August 28, 2003 1:02 PM
> > To: vintagesynthrepair@yahoogroups.com
> > Subject: [vintagesynthrepair] Help for someone new
> > to Organs
> > 
> > 
> > I recently acquired an older Wurlitzer Organ in
> > excellent condition. 
> > I'm seeking information about its origins... 
> > It is a model 4150BW with a serial number of
> 687039.
> > Does anyone have 
> > sources or advice for me to find further
> > information? I have tried 
> > some basic internet searches, but have had little
> > luck with that 
> > particular model.
> > Let me know.
> > 
> > Thanks,
> > Tom 
> > 
> > 
> > 
> > 
> > 
> > 
> >
>
________________________________________________________________________
> >
>
________________________________________________________________________
> > 
> > Message: 2
> > Date: Fri, 29 Aug 2003 03:18:43 -0000
> > From: "julie_bells276" 
> > Subject: Is this a handjob or a blowjob?
> > 
> > Does your woman mistake a handjob for a blowjob
> and
> > give you lousy head with no wet mouth action?
> > When I need a woman that sucks cock like a pro I
> go
> > here.
> > 
> > http://www.casualsexads.net/landing.asp?afl=NYHO
> > 
> > 
> > 
> >
>
________________________________________________________________________
> >
>
________________________________________________________________________
> > 
> > Message: 3
> > Date: Fri, 29 Aug 2003 10:22:00 +0200
> > From: "Alexandre" 
> > Subject: Various IC : SSM & CEM on Ebay !!!!! 25
> IC
> > : Strating Price : 1 euro !!!!
> > 
> > Hi !
> > 
> > I've just put an auction on www.ebay.fr
> > 
> >
>
http://cgi.ebay.fr/ws/eBayISAPI.dll?ViewItem&category=17401&item=2554677417
> > 
> > Vends lot de :
> > 
> > Selling various IC :
> > 
> > SSM and CEM Chips (25 pces)
> > 
> > Id\ufffdal si votre vintage a perdu une voix ou si
> votre
> > filtre s'en est all\ufffd..
> > 
> > Kit de survie tr\ufffds utile pour tout amateur
> > d'analogique.
> > 
> > Vente du lot uniquement : PAS DE VENTE AU DETAIL.
> > Liste SSM et CEM :
> > 
> > 2 X CEM 3360 (VCA Moog, Sequential...)
> > 5 X SSM 2056 (Korg Polysix, Poly61....)
> > 6 X SSM 2024 (Opera 6....)
> > 6 X SSM 2044 (VCF PPG, Korg Monopoly, Polysix....)
> > 4 X SM 8352
> > 2 X SM 8337
> > 
> > Seuls les 3360 sont neuf (jamais utilis\ufffds). Les
> > autres sont des 2\ufffdmes mains,
> > mais ont \ufffdt\ufffd t\ufffdst\ufffds et fonctionnent parfaitement.
> > 
> > The 3360 are NEW. The others are 2nd hand, but
> have
> > been tested and works
> > very well.
> > 
> > Pour plus de d\ufffdtails :
> > 
> 
=== message truncated ===


__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com