Vintage Synth Repair

Hello,

I am in the D.C. area and would like to have my Arp 2600 serviced.  
Currently, the VCF does not work.  I have asked around and everybody 
has says Phil Chircco at CMS is the best, but, After 2 months of 
trying to contact him via email and telephone with no reply, I have 
given up.  Does anybody know of a person who can service an Arp 2600 
in Baltimore, D.C, or Northern Virginia?

Thanks,

Ethan

> I am in the D.C. area and would like to have my Arp 2600 serviced.  
> Currently, the VCF does not work.  I have asked around and everybody 
> has says Phil Chircco at CMS is the best, but, After 2 months of 
> trying to contact him via email and telephone with no reply, I have 
> given up.  Does anybody know of a person who can service an Arp 2600 
> in Baltimore, D.C, or Northern Virginia?
> 
> Thanks,
> 
> Ethan
> 

Jeff and I used to do synth repairs.  I'm not actively taking on work until
I get all my own stuff up and running :-), but I think Jeff is still working
on gear.  Give him a shout via email (vco3@...).  He's up in the
Baltimore area.
-- 

_______________________________________________________________________
Tom Moravansky                                    tom@...

Hello,
There is a place just outside of DC called Prototypes. I had them 
work on my MicroMoog last summer, and when I picked it up they were 
working on an Arp 2600. I believe that the shop is in Salisbury 
Maryland. The guy who worked on my synth there was named Bill Leaf. 
If you are not in a hurry, you may be satisfied........
Scott


--- In vintagesynthrepair@y..., Tom Moravansky <tom@s...> wrote:
> > I am in the D.C. area and would like to have my Arp 2600 
serviced.  
> > Currently, the VCF does not work.  I have asked around and 
everybody 
> > has says Phil Chircco at CMS is the best, but, After 2 months of 
> > trying to contact him via email and telephone with no reply, I 
have 
> > given up.  Does anybody know of a person who can service an Arp 
2600 
> > in Baltimore, D.C, or Northern Virginia?
> > 
> > Thanks,
> > 
> > Ethan
> > 
> 
> Jeff and I used to do synth repairs.  I'm not actively taking on 
work until
> I get all my own stuff up and running :-), but I think Jeff is 
still working
> on gear.  Give him a shout via email (vco3@a...).  He's up in the
> Baltimore area.
> -- 
> 
> 
______________________________________________________________________
_
> Tom Moravansky                                    tom@s...

In a message dated 3/4/02 6:17:41 AM Pacific Standard Time, 
schapin@... writes:

<< Subj:     [vintagesynthrepair] Re: Who does Arp 2600 Repair?
 Date:  3/4/02 6:17:41 AM Pacific Standard Time

 From:  schapin@... (progger23236)
 Reply-to:  vintagesynthrepair@yahoogroups.com
 To:    vintagesynthrepair@yahoogroups.com
 
 Hello,
 There is a place just outside of DC called Prototypes. I had them 
 work on my MicroMoog last summer, and when I picked it up they were 
 working on an Arp 2600. I believe that the shop is in Salisbury 
 Maryland. The guy who worked on my synth there was named Bill Leaf. 
 If you are not in a hurry, you may be satisfied........
 Scott >>
Or try Brian hale at Shread head Electronics in Madison Wisconsin 
1-608-279-1064
Richard

Thanks for all the tips!  

Hopefully, I can have my Arp 2600 blipping and blooping like r2d2 
again.


Ethan