Wiardgroup

Follow the diagram on this page:

http://www.elpac.com/uploads/documents/datasheets/wmpage3
4and35.htm

+15V is V1 and -15V is V2

They don't specify front or rear view, you will have to determine 
that by inspection.

Basically Ground is Pin 1, +15V is pin 3 and -15V is pin 5. But 
don't trust that the numbering matches between different 
connector brands.

--- In wiardgroup@yahoogroups.com, Doug Pearson 
<jasret@m...> wrote:
> Hi All,
> 
> I was just wiring up a +/-15v power supply for Wiard usage, 
and I'm stumped 
> when it comes to the final step of wiring the DIN receptacle.
> 
> When looking at it from the back (the side where the wires from 
the power 
> supply attach, not the side that the DIN cable plugs into), there 
are 5 
> terminals, labeled (from left to right):
> 1 / 4  /  2 /  5  /  3
> 1 is at 9 o'clock, 2 is down at 6 o'clock, and 3 is at 3 o'clock
> the lock tab is up top at 12 o'clock
> 
> which three of those five terminals do I attach -15v, ground, and 
+15v to?
> 
> Thanks,
> 
> 	-Doug
> 	 jasret@m...