thanks Gary, yes, I had it for but some reason wasn't "hearing it"
it was easier when I used the envelope to control a VCO pitch.
it was easier when I used the envelope to control a VCO pitch.
Mark
From: Gary Chang
To: wiardgroup@yahoogroups.com
Sent: Friday, 14 August, 2009 12:43:32 AM
Subject: [wiardgroup] Re: ADSR from Envelator
To: wiardgroup@yahoogroups.com
Sent: Friday, 14 August, 2009 12:43:32 AM
Subject: [wiardgroup] Re: ADSR from Envelator
The only other detail is to switch one module to AR and the other to AD. Once this is done, the balance knob will control the sustain voltage level when the gate is held open. (The AR side is the sustain side).
Cheers,
GC
--- In wiardgroup@yahoogro ups.com, Mark Griffiths wrote:
>
> hi, I was feeling a bit conservative so I've just tried this... but I think I'm not reading the Modular notation correctly, what are all the connections?
>
> I have gate to Gate1 and Gate2..out via MixMod..what are the other connections?
>
> all the best, Mark
>