Wiardgroup

[private email]

Mark -

I'm currently working on a second batch of Dual Slope Detectors, which
are a blast to use with a Joystick.  A Joystick and JAG are cool as you
can get, but if you end up getting a second joystick the Slope Detector
is a great compliment to the JAG.

Basically it has three outputs, one of which is always high (gated) with
the other two at 0v.  If the input voltage is steady, then the Steady
output is gated (high).  If the voltage is rising (ie you move the
joystick UP), then the Rising output is gates.  Same for the Falling
output.  Since it's a Dual module, you can plug in both X and Y outputs
and have it gate four different events just by moving a bit.  (advance a
sequencer, trigger an EG, etc etc etc).

Or you could mult the output of the Joystick and send them to a JAG and
an SD.  Attached is a pic  :)

Andrew

>>> Mark Griffiths <mark@inspiringsounds.com> 01/06/07 11:50 AM >>>
Hi, I guess you mean the 300 series? Personally I'm more interested in
the development of the 1200 series. One or possibly two modules in the
year would be nice and something that we can all probably share in.
   
  Loving the noise ring..still the joystick and JAG to go. Quick
question..can you use two joysticks with the JAG..I thought I a set up
like that on a Youtube demo. 
   
  Good wishes for the New Year all!
   
  mark
  www.inspiringsounds.com
   

cray5656 <amni56@tpg.com.au> wrote:
          hi all

so will this year see a complete Wiard system. of all the demos i have
heard or seen the Wiards sound the most out there..its not fair to
tease us who dont own one.