Emu XL-7 & MP-7 User's Group

> Von: "steve_the_composer" <smw-mail@...>
> An: xl7@yahoogroups.com
> Betreff: [xl7] Re: (not) a nasty bug + CC33-63 issue
> Datum: Tue, 27 Dec 2005 16:21:17 -0000
> 
> --- In xl7@yahoogroups.com, "Zsolt Szabo" <Zsolt.Szabo@g...> wrote:
> >
> > Hi Steve,
> > see my comments between your lines ....
> 
> [snip]
> 
> I may have some time this week to test some things refarding clock 
> issues. If I can make some time I will try to simulate the kind of 
> setup you have (although with diffrent gear and software).
> 
> As I understand it, you want (1) clock and note data going out from 
> the E-Mu to other gear and (2) CC data coming from one piece of gear 
> going back into the E-Mubut without feeding the clock data?  Is that 
> right? What other design features are important to the setup? Where 
> do you currently have your midi interface/router? 


Currently the Emu is the master sending note, cc and clock data to
other stuff. The Emu is wired to one of the ports of AMT8, other
stuff is connected to other AMT8 ports, using up all the available ports.
Waldorf XTk is the masterkeyboard, although Emu is used too.
Emu is set to send CC and note data on the MIDI out, but I tried with
those disabled, too.
So I want to be able to send data from XTk through Emu (because I want
to record it as well) to other synths. On the Emu I select the
respective track to route XTk's data, using rechannelize input always
and tracks set up so they play external only with proper MIDI channel
assignment.


> I should add that I have the P2500, but from what I understand, for 
> the issues here realted to OS2.0, that shouldn't make a difference.  
> (If anyone knows otherwise, please speak up.)
> 
> 
> > > PS:
> > > 
> > > > Since CC33-63 is nonexistent on the XL7 this was the only 
> solution.
> > > 
> > > They are not non-existent. You can assign CC numbers from 1 to
> > > 119 inclusive. 
> > 
> > Really ? Maybe I'm blind but when I tried to chose the CC number
> > for the knob after 32 it jumped to 64 and in-between values were
> > omitted. Could you tell me where can I do it ? 
> 
> Here's what I do on the P2500 with OS2.0:
> 
> 1. Press the CONTROLLERS button.
> 2. Set the knobs to PROGRAM.
> 3. Select a knob K1 . . K16.
> 4. Move cursor to second line: Ctrl: 1
> 
> I can assign each knob from CC 1 to CC 119. Each knob can be assigned 
> to the Basic channel, or channels 01A --> 16B. Each can be set to 
> send CC data to the internal synth engine, external gear, both 
> internal and external, and the sequencer. I believe in seq mode, the 
> channel setting of individual knobs is irrelevant.
> 
> Setting the knobs to seq in programmable mode allows you to record 
> the CCs into your tracks. So I ran a test of the CC33-63 issue. The E-
> Mu sequencer does indeed record all CCs from 1 to 119 inclusive when 
> the programmable knob is set to send knob data to seq. I assume it 
> will also send the same CC data to external gear if set to ext or 
> both. 
> 
> Do you have OS2.0?


Yes, I have OS 2.0. I'll make another test tonight but when I tried
it was impossible to get CC 33-63 set up.
Thanks for the help ...
        Zsolt


> --STeve
> 
>  
>  
> 
> 
> 
> 
> 
> 
> 
>  
> Yahoo! Groups Links
> 
> 
> 
>  
> 
> 

-- 
Telefonieren Sie schon oder sparen Sie noch?
NEU: GMX Phone_Flat http://www.gmx.net/de/go/telefonie