Emu XL-7 & MP-7 User's Group

So much for typing a quick reply when I'm too tired to proofread. Obviously that was a typo--I typed CC instead of sysex. (I was thinking "do not send sysex, only CC" but it came out wrong. Thanks for catching the typo.
--Steve  

--- In xl7@yahoogroups.com, James Ulibarri <jamesulibarri@...> wrote:
>
> " Basically the knobs do not send CC."
> 
> Maybe not in the 2500, but the PX-7 does.   It throws CC's like crazy.  Make
> sure you enable yours in Global.
> 
> I think I'll pick up a Doepfer Regelwerk actually.   A little bit on the
> expensive side but i'll make it happen.
> Good looking out on the links and info though.
> 
> Thanks
> 
> On Tue, Aug 31, 2010 at 5:14 PM, steve_the_composer <smw-mail@...>wrote:
> 
> >
> >
> > I have done quite a bit with sysex and the P2500. Basically the knobs do
> > not send CC. You can do stuff with sysex in remote control mode, but that is
> > really using sysex to control the e-mu remotely.
> >
> > If you go into remote control mode (see sysex manual), you can view what
> > sysex knobs and buttons send by using e-loader's midi monitor (or any other
> > mini monitor).
> >
> > I know I have done some charts correlating sysex but I am not sure if its
> > posted here or in the P2K group.
> >
> > I don't have my sysex manual out, but I suggest you read the section on
> > remote control. BTW, not all of what can be done via remote control sysex is
> > documented in the manual. Read through the archives, too. A few of us have
> > discussed it over the years.
> >
> > Also, although the CS will not record/edit sysex, you can embed sysex
> > commands in patterns by uploading a *.mid file with e-loader. I wrote
> > extensively about it, but I may have removed the posts/files in order to
> > reorganize it--which I never did.
> >
> > --Steve
> >
> >
> > --- In xl7@yahoogroups.com <xl7%40yahoogroups.com>, James Ulibarri
> > <jamesulibarri@> wrote:
> > >
> > > Has anyone tried throwing any sysex messages from the Command Stations
> > > control knobs?
> > > I am interested in controlling a Yamaha TX-7 or Akai S5000. I know it
> > > throws CC's like crazy, but not sure about Sysex messages.
> > > Now if it does, is there Midi Learn to latch parameters quickly without
> > > getting all crazy into the hex/dex stuff.
> > > I think I already know the answer to that regarding any sysex stuff being
> > > painless and easy. Forget about it.
> > > I know the Behringer knob boxes, Mackie C4 Pro, Peavy pc1600 allowed for
> > > this kind of think but I am not sure about the Command Stations.
> > > I may be asking too much from the little guy.
> > >
> >
> >  
> >
>