Emu XL-7 & MP-7 User's Group

These features would be nice:

- Snap mode for the knobs.  Not only in Quick Edit, but Volume and Pan too 
(especially Volume please!).
- The ability to Select more than one track for Erase, Copy, Cut, and 
Paste commands. Even if it's only all of them, maybe in the field where 
you select the track, you could choose the letter "A" to indicated all 
tracks.
- The ability to XMIX more than one track at once (no idea how to 
implement this).
- Some way to see the name of currently playing Pattern without stopping 
playback.  Currently you can only see the current location, but not it's 
name.
- A way to see if Presets are currently being used in a Pattern.
- Finer tempo resolution!!!!!  :)
- Press and HOLD the power button for power off, not just 1 press and wait 
5 seconds.
- More Sysex dump options.  I'd like to see an "ALL" function that sends 
everything in the machine in one pass (regardless of how long this takes), 
good for those people on Macs that want to save their User data but can't 
use E-Loader, for obvious reasons.  Also, an "ALL User Presets" would be 
nice too, much easier than having to wait and switch banks when you're 
trying to save your Presets.  Finally, an "All User Multi's" too.
- Realtime preview of Transpose, Quantize, etc.
- All Pattern Edit functions should work without stopping the sequencer 
(hey, it is a wish list!).
- A way to copy arp data to a track as MIDI notes.
- The option to turn real-time Filter Resonance on or off.  I for one, 
thought it sounded fine and would like to see this re-added to the OS 
again.

More Shortcut ideas:

- Edit + Track up/down buttons toggles between the 16A and 16B channels. 
For instance, Press EDIT+Track Up would take you to Channel 1B, press them 
again and you go to 1A, etc.

- Edit + Save will automatically perform a Revert To Saved (thus acting 
sort of like an Undo command).

- Edit + Erase will initialize the current Pattern.

- Edit + Audition will toggle the Arp on or off for the currently selected 
Preset on the basic channel.

- When in Loop mode, Pressing Stop + Play should take you to the beginning 
of the Loop, not the beginning of the Pattern.


So how about it Aaron?  What do we need to do to help you make this 
happen?  I can't imagine you would be open about telling us you still have 
the ability to make OS improvements if you didn't have something in mind. 
:)  I can guarantee a lot of people would be willing to send some money 
your way to make this happen, name your price :)

rEalm



The information transmitted is intended only for the person(s)or entity 
to which it is addressed and may contain confidential and/or legally 
privileged material. Delivery of this message to any person other than 
the intended recipient(s) is not intended in any way to waive privilege 
or confidentiality. Any review, retransmission, dissemination or other 
use of , or taking of any action in reliance upon, this information by 
entities other than the intended recipient is prohibited. If you 
receive this in error, please contact the sender and delete the 
material from any computer.

For Translation:

http://www.baxter.com/email_disclaimer


[Non-text portions of this message have been removed]

Can I add:

- The ability to set the Trigger buttons up to transmit continuous
controller messages.

-----Original Message-----
From: erik_magrini@... [mailto:erik_magrini@...]
Sent: 12 January 2004 15:16
To: xl7@yahoogroups.com
Subject: [xl7] Aaron should make us a new XX-7 OS because....


These features would be nice:

- Snap mode for the knobs.  Not only in Quick Edit, but Volume and Pan too
(especially Volume please!).
- The ability to Select more than one track for Erase, Copy, Cut, and
Paste commands. Even if it's only all of them, maybe in the field where
you select the track, you could choose the letter "A" to indicated all
tracks.
- The ability to XMIX more than one track at once (no idea how to
implement this).
- Some way to see the name of currently playing Pattern without stopping
playback.  Currently you can only see the current location, but not it's
name.
- A way to see if Presets are currently being used in a Pattern.
- Finer tempo resolution!!!!!  :)
- Press and HOLD the power button for power off, not just 1 press and wait
5 seconds.
- More Sysex dump options.  I'd like to see an "ALL" function that sends
everything in the machine in one pass (regardless of how long this takes),
good for those people on Macs that want to save their User data but can't
use E-Loader, for obvious reasons.  Also, an "ALL User Presets" would be
nice too, much easier than having to wait and switch banks when you're
trying to save your Presets.  Finally, an "All User Multi's" too.
- Realtime preview of Transpose, Quantize, etc.
- All Pattern Edit functions should work without stopping the sequencer
(hey, it is a wish list!).
- A way to copy arp data to a track as MIDI notes.
- The option to turn real-time Filter Resonance on or off.  I for one,
thought it sounded fine and would like to see this re-added to the OS
again.

More Shortcut ideas:

- Edit + Track up/down buttons toggles between the 16A and 16B channels.
For instance, Press EDIT+Track Up would take you to Channel 1B, press them
again and you go to 1A, etc.

- Edit + Save will automatically perform a Revert To Saved (thus acting
sort of like an Undo command).

- Edit + Erase will initialize the current Pattern.

- Edit + Audition will toggle the Arp on or off for the currently selected
Preset on the basic channel.

- When in Loop mode, Pressing Stop + Play should take you to the beginning
of the Loop, not the beginning of the Pattern.


So how about it Aaron?  What do we need to do to help you make this
happen?  I can't imagine you would be open about telling us you still have
the ability to make OS improvements if you didn't have something in mind.
:)  I can guarantee a lot of people would be willing to send some money
your way to make this happen, name your price :)

rEalm



The information transmitted is intended only for the person(s)or entity
to which it is addressed and may contain confidential and/or legally
privileged material. Delivery of this message to any person other than
the intended recipient(s) is not intended in any way to waive privilege
or confidentiality. Any review, retransmission, dissemination or other
use of , or taking of any action in reliance upon, this information by
entities other than the intended recipient is prohibited. If you
receive this in error, please contact the sender and delete the
material from any computer.

For Translation:

http://www.baxter.com/email_disclaimer


[Non-text portions of this message have been removed]




Yahoo! Groups Links

To visit your group on the web, go to:
 http://groups.yahoo.com/group/xl7/

To unsubscribe from this group, send an email to:
 xl7-unsubscribe@yahoogroups.com

Your use of Yahoo! Groups is subject to:
 http://docs.yahoo.com/info/terms/

Of course!  For what would you use this out of curiousity?

rEalm



Can I add:

- The ability to set the Trigger buttons up to transmit continuous
controller messages.

 







The information transmitted is intended only for the person(s)or entity 
to which it is addressed and may contain confidential and/or legally 
privileged material. Delivery of this message to any person other than 
the intended recipient(s) is not intended in any way to waive privilege 
or confidentiality. Any review, retransmission, dissemination or other 
use of, or taking of any action in reliance upon, this information by 
entities other than the intended recipient is prohibited. If you 
receive this in error, please contact the sender and delete the 
material from any computer.

For Translation:

http://www.baxter.com/email_disclaimer


[Non-text portions of this message have been removed]

I have an E-MU Ultra with RFX, and the RFX responds to CC messages to
control fx parameters and fx levels. I used to have a Doepfer Regelwerk
which I could use to send CC messages (of a preset value) by pressing a
button, which would instantly change the fx. Using knobs doesn't give the
same effect as there is always a slight 'fade-in', and you can press
multiple buttons together, whereas you can only twist 2 knobs at one time...

On the XX-7 it would be useful for changing the Mix Output parameter on the
fly (CC79), or maybe the Arp Status (cc80) plus anything else you might
want.

Regards,

Stu

-----Original Message-----
From: erik_magrini@... [mailto:erik_magrini@...]
Sent: 12 January 2004 15:36
To: xl7@yahoogroups.com
Subject: RE: [xl7] Aaron should make us a new XX-7 OS because....


Of course!  For what would you use this out of curiousity?

rEalm



Can I add:

- The ability to set the Trigger buttons up to transmit continuous
controller messages.









The information transmitted is intended only for the person(s)or entity
to which it is addressed and may contain confidential and/or legally
privileged material. Delivery of this message to any person other than
the intended recipient(s) is not intended in any way to waive privilege
or confidentiality. Any review, retransmission, dissemination or other
use of, or taking of any action in reliance upon, this information by
entities other than the intended recipient is prohibited. If you
receive this in error, please contact the sender and delete the
material from any computer.

For Translation:

http://www.baxter.com/email_disclaimer


[Non-text portions of this message have been removed]




Yahoo! Groups Links

To visit your group on the web, go to:
 http://groups.yahoo.com/group/xl7/

To unsubscribe from this group, send an email to:
 xl7-unsubscribe@yahoogroups.com

Your use of Yahoo! Groups is subject to:
 http://docs.yahoo.com/info/terms/

The ability to define/edit a custom message and logo at boot.

:)

erik_magrini@... wrote:
> These features would be nice:
-- 
Sebastien,
-=-=-=-=-=
We used to write taglines with pencil & paper, my son.

So what about open sourcing it? How much would that cost us?

-m@

> -----Original Message-----
> From: [cYcLoThYmIqUe] [mailto:poumtschak@...] 
> Sent: Monday, January 12, 2004 2:11 PM
> To: xl7@yahoogroups.com
> Subject: Re: [xl7] Aaron should make us a new XX-7 OS because....
> 
> 
> The ability to define/edit a custom message and logo at boot.
> 
> :)
> 
> erik_magrini@... wrote:
> > These features would be nice:
> -- 
> Sebastien,
> -=-=-=-=-=
> We used to write taglines with pencil & paper, my son.
> 
>  
> 
> Yahoo! Groups Links
> 
> To visit your group on the web, go to:
>  http://groups.yahoo.com/group/xl7/
> 
> To unsubscribe from this group, send an email to:
>  xl7-unsubscribe@yahoogroups.com
> 
> Your use of Yahoo! Groups is subject to:
>  http://docs.yahoo.com/info/terms/ 
> 
> 
>

How about the ability to hook up a computer keyboard to enter text 
like the emulator? USB? 

--- In xl7@yahoogroups.com, erik_magrini@B... wrote:
> These features would be nice:
> 
> - Snap mode for the knobs.  Not only in Quick Edit, but Volume and 
Pan too 
> (especially Volume please!).
> - The ability to Select more than one track for Erase, Copy, Cut, 
and 
> Paste commands. Even if it's only all of them, maybe in the field 
where 
> you select the track, you could choose the letter "A" to indicated 
all 
> tracks.
> - The ability to XMIX more than one track at once (no idea how to 
> implement this).
> - Some way to see the name of currently playing Pattern without 
stopping 
> playback.  Currently you can only see the current location, but 
not it's 
> name.
> - A way to see if Presets are currently being used in a Pattern.
> - Finer tempo resolution!!!!!  :)
> - Press and HOLD the power button for power off, not just 1 press 
and wait 
> 5 seconds.
> - More Sysex dump options.  I'd like to see an "ALL" function that 
sends 
> everything in the machine in one pass (regardless of how long this 
takes), 
> good for those people on Macs that want to save their User data 
but can't 
> use E-Loader, for obvious reasons.  Also, an "ALL User Presets" 
would be 
> nice too, much easier than having to wait and switch banks when 
you're 
> trying to save your Presets.  Finally, an "All User Multi's" too.
> - Realtime preview of Transpose, Quantize, etc.
> - All Pattern Edit functions should work without stopping the 
sequencer 
> (hey, it is a wish list!).
> - A way to copy arp data to a track as MIDI notes.
> - The option to turn real-time Filter Resonance on or off.  I for 
one, 
> thought it sounded fine and would like to see this re-added to the 
OS 
> again.
> 
> More Shortcut ideas:
> 
> - Edit + Track up/down buttons toggles between the 16A and 16B 
channels. 
> For instance, Press EDIT+Track Up would take you to Channel 1B, 
press them 
> again and you go to 1A, etc.
> 
> - Edit + Save will automatically perform a Revert To Saved (thus 
acting 
> sort of like an Undo command).
> 
> - Edit + Erase will initialize the current Pattern.
> 
> - Edit + Audition will toggle the Arp on or off for the currently 
selected 
> Preset on the basic channel.
> 
> - When in Loop mode, Pressing Stop + Play should take you to the 
beginning 
> of the Loop, not the beginning of the Pattern.
> 
> 
> So how about it Aaron?  What do we need to do to help you make 
this 
> happen?  I can't imagine you would be open about telling us you 
still have 
> the ability to make OS improvements if you didn't have something 
in mind. 
> :)  I can guarantee a lot of people would be willing to send some 
money 
> your way to make this happen, name your price :)
> 
> rEalm
> 
> 
> 
> The information transmitted is intended only for the person(s)or 
entity 
> to which it is addressed and may contain confidential and/or 
legally 
> privileged material. Delivery of this message to any person other 
than 
> the intended recipient(s) is not intended in any way to waive 
privilege 
> or confidentiality. Any review, retransmission, dissemination or 
other 
> use of , or taking of any action in reliance upon, this 
information by 

> entities other than the intended recipient is prohibited. If you 
> receive this in error, please contact the sender and delete the 
> material from any computer.
> 
> For Translation:
> 
> http://www.baxter.com/email_disclaimer
> 
> 
> [Non-text portions of this message have been removed]

Now that is a BRILLIANT suggestion!

dj 61 wrote:
> How about the ability to hook up a computer keyboard to enter text
> like the emulator? USB?
-- 
Sebastien,
-=-=-=-=-=
We used to write taglines with pencil & paper, my son.

Even better would be a way to display and edit the global commands 
on my computer, especially when I am trying to get my external gear 
to work better, like with program changes and such.....

--- In xl7@yahoogroups.com, "dj 61" <dj61@d...> wrote:
> How about the ability to hook up a computer keyboard to enter text 
> like the emulator? USB? 
> 
> --- In xl7@yahoogroups.com, erik_magrini@B... wrote:
> > These features would be nice:
> > 
> > - Snap mode for the knobs.  Not only in Quick Edit, but Volume 
and 
> Pan too 
> > (especially Volume please!).
> > - The ability to Select more than one track for Erase, Copy, 
Cut, 
> and 
> > Paste commands. Even if it's only all of them, maybe in the 
field 
> where 
> > you select the track, you could choose the letter "A" to 
indicated 
> all 
> > tracks.
> > - The ability to XMIX more than one track at once (no idea how 
to 
> > implement this).
> > - Some way to see the name of currently playing Pattern without 
> stopping 
> > playback.  Currently you can only see the current location, but 
> not it's 
> > name.
> > - A way to see if Presets are currently being used in a Pattern.
> > - Finer tempo resolution!!!!!  :)
> > - Press and HOLD the power button for power off, not just 1 
press 
> and wait 
> > 5 seconds.
> > - More Sysex dump options.  I'd like to see an "ALL" function 
that 
> sends 
> > everything in the machine in one pass (regardless of how long 
this 
> takes), 
> > good for those people on Macs that want to save their User data 
> but can't 
> > use E-Loader, for obvious reasons.  Also, an "ALL User Presets" 
> would be 
> > nice too, much easier than having to wait and switch banks when 
> you're 
> > trying to save your Presets.  Finally, an "All User Multi's" too.
> > - Realtime preview of Transpose, Quantize, etc.
> > - All Pattern Edit functions should work without stopping the 
> sequencer 
> > (hey, it is a wish list!).
> > - A way to copy arp data to a track as MIDI notes.
> > - The option to turn real-time Filter Resonance on or off.  I 
for 
> one, 
> > thought it sounded fine and would like to see this re-added to 
the 
> OS 
> > again.
> > 
> > More Shortcut ideas:
> > 
> > - Edit + Track up/down buttons toggles between the 16A and 16B 
> channels. 
> > For instance, Press EDIT+Track Up would take you to Channel 1B, 
> press them 
> > again and you go to 1A, etc.
> > 
> > - Edit + Save will automatically perform a Revert To Saved (thus 
> acting 
> > sort of like an Undo command).
> > 
> > - Edit + Erase will initialize the current Pattern.
> > 
> > - Edit + Audition will toggle the Arp on or off for the 
currently 
> selected 
> > Preset on the basic channel.
> > 
> > - When in Loop mode, Pressing Stop + Play should take you to the 
> beginning 
> > of the Loop, not the beginning of the Pattern.
> > 
> > 
> > So how about it Aaron?  What do we need to do to help you make 
> this 
> > happen?  I can't imagine you would be open about telling us you 
> still have 
> > the ability to make OS improvements if you didn't have something 
> in mind. 
> > :)  I can guarantee a lot of people would be willing to send 
some 
> money 
> > your way to make this happen, name your price :)
> > 
> > rEalm
> > 
> > 
> > 
> > The information transmitted is intended only for the person(s)or 
> entity 
> > to which it is addressed and may contain confidential and/or 
> legally 
> > privileged material. Delivery of this message to any person 
other 

> than 
> > the intended recipient(s) is not intended in any way to waive 
> privilege 
> > or confidentiality. Any review, retransmission, dissemination or 
> other 
> > use of , or taking of any action in reliance upon, this 
> information by 
> > entities other than the intended recipient is prohibited. If you 
> > receive this in error, please contact the sender and delete the 
> > material from any computer.
> > 
> > For Translation:
> > 
> > http://www.baxter.com/email_disclaimer
> > 
> > 
> > [Non-text portions of this message have been removed]

But, alas, one that will never happen.  USB is host/slave, unlike
firewire.  It would be the same as trying to plug your USB mouse into
your USB computer keyboard and expecting something to happen.

--- "[cYcLoThYmIqUe]" <poumtschak@...> wrote:
> Now that is a BRILLIANT suggestion!
> 
> dj 61 wrote:
> > How about the ability to hook up a computer keyboard to enter
> > text like the emulator? USB?

__________________________________
Do you Yahoo!?
Yahoo! Hotjobs: Enter the "Signing Bonus" Sweepstakes
http://hotjobs.sweepstakes.yahoo.com/signingbonus

Here's another one:

-Send program change when selecting presets. I'm surprised this is missing
in the first place...

|-----Original Message-----
|From: erik_magrini@... [mailto:erik_magrini@...]
|Sent: 12 January 2004 15:16
|To: xl7@yahoogroups.com
|Subject: [xl7] Aaron should make us a new XX-7 OS because....
|
|
|These features would be nice:
|
|- Snap mode for the knobs.  Not only in Quick Edit, but Volume and Pan too
|(especially Volume please!).
|- The ability to Select more than one track for Erase, Copy, Cut, and
|Paste commands. Even if it's only all of them, maybe in the field where
|you select the track, you could choose the letter "A" to indicated all
|tracks.
|- The ability to XMIX more than one track at once (no idea how to
|implement this).
|- Some way to see the name of currently playing Pattern without stopping
|playback.  Currently you can only see the current location, but not it's
|name.
|- A way to see if Presets are currently being used in a Pattern.
|- Finer tempo resolution!!!!!  :)
|- Press and HOLD the power button for power off, not just 1 press and wait
|5 seconds.
|- More Sysex dump options.  I'd like to see an "ALL" function that sends
|everything in the machine in one pass (regardless of how long this takes),
|good for those people on Macs that want to save their User data but can't
|use E-Loader, for obvious reasons.  Also, an "ALL User Presets" would be
|nice too, much easier than having to wait and switch banks when you're
|trying to save your Presets.  Finally, an "All User Multi's" too.
|- Realtime preview of Transpose, Quantize, etc.
|- All Pattern Edit functions should work without stopping the sequencer
|(hey, it is a wish list!).
|- A way to copy arp data to a track as MIDI notes.
|- The option to turn real-time Filter Resonance on or off.  I for one,
|thought it sounded fine and would like to see this re-added to the OS
|again.
|
|More Shortcut ideas:
|
|- Edit + Track up/down buttons toggles between the 16A and 16B channels.
|For instance, Press EDIT+Track Up would take you to Channel 1B, press them
|again and you go to 1A, etc.
|
|- Edit + Save will automatically perform a Revert To Saved (thus acting
|sort of like an Undo command).
|
|- Edit + Erase will initialize the current Pattern.
|
|- Edit + Audition will toggle the Arp on or off for the currently selected
|Preset on the basic channel.
|
|- When in Loop mode, Pressing Stop + Play should take you to the beginning
|of the Loop, not the beginning of the Pattern.
|
|
|So how about it Aaron?  What do we need to do to help you make this
|happen?  I can't imagine you would be open about telling us you still have
|the ability to make OS improvements if you didn't have something in mind.
|:)  I can guarantee a lot of people would be willing to send some money
|your way to make this happen, name your price :)
|
|rEalm
|
|
|
|The information transmitted is intended only for the person(s)or entity
|to which it is addressed and may contain confidential and/or legally
|privileged material. Delivery of this message to any person other than
|the intended recipient(s) is not intended in any way to waive privilege
|or confidentiality. Any review, retransmission, dissemination or other
|use of , or taking of any action in reliance upon, this information by
|entities other than the intended recipient is prohibited. If you
|receive this in error, please contact the sender and delete the
|material from any computer.
|
|For Translation:
|
|http://www.baxter.com/email_disclaimer
|
|
|[Non-text portions of this message have been removed]
|
|
|
|
|Yahoo! Groups Links
|
|To visit your group on the web, go to:
| http://groups.yahoo.com/group/xl7/
|
|To unsubscribe from this group, send an email to:
| xl7-unsubscribe@yahoogroups.com
|
|Your use of Yahoo! Groups is subject to:
| http://docs.yahoo.com/info/terms/
|

I'm in ... I think we are the luckiest group in the world to have him keep these boxes EVERGREEN !!!

If you could work in conjunction with the Saxonite guys with a GUI we would be BAD AS BALLS !!

I'm with Realm ... You name it... let's do it !!

Aaron ... Good luck with the new gig !!! ... Once you get settled in and if you have the passion to do this I am sure your effots would be greatly welcomed !!!

  ----- Original Message ----- 
  From: Stu 
  To: xl7@yahoogroups.com 
  Sent: Monday, January 12, 2004 6:20 PM
  Subject: RE: [xl7] Aaron should make us a new XX-7 OS because....


  Here's another one:

  -Send program change when selecting presets. I'm surprised this is missing
  in the first place...

  |-----Original Message-----
  |From: erik_magrini@... [mailto:erik_magrini@...]
  |Sent: 12 January 2004 15:16
  |To: xl7@yahoogroups.com
  |Subject: [xl7] Aaron should make us a new XX-7 OS because....
  |
  |
  |These features would be nice:
  |
  |- Snap mode for the knobs.  Not only in Quick Edit, but Volume and Pan too
  |(especially Volume please!).
  |- The ability to Select more than one track for Erase, Copy, Cut, and
  |Paste commands. Even if it's only all of them, maybe in the field where
  |you select the track, you could choose the letter "A" to indicated all
  |tracks.
  |- The ability to XMIX more than one track at once (no idea how to
  |implement this).
  |- Some way to see the name of currently playing Pattern without stopping
  |playback.  Currently you can only see the current location, but not it's
  |name.
  |- A way to see if Presets are currently being used in a Pattern.
  |- Finer tempo resolution!!!!!  :)
  |- Press and HOLD the power button for power off, not just 1 press and wait
  |5 seconds.
  |- More Sysex dump options.  I'd like to see an "ALL" function that sends
  |everything in the machine in one pass (regardless of how long this takes),
  |good for those people on Macs that want to save their User data but can't
  |use E-Loader, for obvious reasons.  Also, an "ALL User Presets" would be
  |nice too, much easier than having to wait and switch banks when you're
  |trying to save your Presets.  Finally, an "All User Multi's" too.
  |- Realtime preview of Transpose, Quantize, etc.
  |- All Pattern Edit functions should work without stopping the sequencer
  |(hey, it is a wish list!).
  |- A way to copy arp data to a track as MIDI notes.
  |- The option to turn real-time Filter Resonance on or off.  I for one,
  |thought it sounded fine and would like to see this re-added to the OS
  |again.
  |
  |More Shortcut ideas:
  |
  |- Edit + Track up/down buttons toggles between the 16A and 16B channels.
  |For instance, Press EDIT+Track Up would take you to Channel 1B, press them
  |again and you go to 1A, etc.
  |
  |- Edit + Save will automatically perform a Revert To Saved (thus acting
  |sort of like an Undo command).
  |
  |- Edit + Erase will initialize the current Pattern.
  |
  |- Edit + Audition will toggle the Arp on or off for the currently selected
  |Preset on the basic channel.
  |
  |- When in Loop mode, Pressing Stop + Play should take you to the beginning
  |of the Loop, not the beginning of the Pattern.
  |
  |
  |So how about it Aaron?  What do we need to do to help you make this
  |happen?  I can't imagine you would be open about telling us you still have
  |the ability to make OS improvements if you didn't have something in mind.
  |:)  I can guarantee a lot of people would be willing to send some money
  |your way to make this happen, name your price :)
  |
  |rEalm
  |
  |
  |
  |The information transmitted is intended only for the person(s)or entity
  |to which it is addressed and may contain confidential and/or legally
  |privileged material. Delivery of this message to any person other than
  |the intended recipient(s) is not intended in any way to waive privilege
  |or confidentiality. Any review, retransmission, dissemination or other
  |use of , or taking of any action in reliance upon, this information by
  |entities other than the intended recipient is prohibited. If you
  |receive this in error, please contact the sender and delete the
  |material from any computer.
  |
  |For Translation:
  |
  |http://www.baxter.com/email_disclaimer
  |
  |
  |[Non-text portions of this message have been removed]
  |
  |
  |
  |
  |Yahoo! Groups Links
  |
  |To visit your group on the web, go to:
  | http://groups.yahoo.com/group/xl7/
  |
  |To unsubscribe from this group, send an email to:
  | xl7-unsubscribe@yahoogroups.com
  |
  |Your use of Yahoo! Groups is subject to:
  | http://docs.yahoo.com/info/terms/
  |



------------------------------------------------------------------------------
  Yahoo! Groups Links

    a.. To visit your group on the web, go to:
    http://groups.yahoo.com/group/xl7/
      
    b.. To unsubscribe from this group, send an email to:
    xl7-unsubscribe@yahoogroups.com
      
    c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 



[Non-text portions of this message have been removed]

But could the Saxonite guys make this work ?

  ----- Original Message ----- 
  From: Aaron Eppolito 
  To: xl7@yahoogroups.com 
  Sent: Monday, January 12, 2004 4:58 PM
  Subject: Re: [xl7] Re: Aaron should make us a new XX-7 OS because....


  But, alas, one that will never happen.  USB is host/slave, unlike
  firewire.  It would be the same as trying to plug your USB mouse into
  your USB computer keyboard and expecting something to happen.

  --- "[cYcLoThYmIqUe]" <poumtschak@...> wrote:
  > Now that is a BRILLIANT suggestion!
  > 
  > dj 61 wrote:
  > > How about the ability to hook up a computer keyboard to enter
  > > text like the emulator? USB?

  __________________________________
  Do you Yahoo!?
  Yahoo! Hotjobs: Enter the "Signing Bonus" Sweepstakes
  http://hotjobs.sweepstakes.yahoo.com/signingbonus

        Yahoo! Groups Sponsor 
              ADVERTISEMENT
             
       
       


------------------------------------------------------------------------------
  Yahoo! Groups Links

    a.. To visit your group on the web, go to:
    http://groups.yahoo.com/group/xl7/
      
    b.. To unsubscribe from this group, send an email to:
    xl7-unsubscribe@yahoogroups.com
      
    c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 



[Non-text portions of this message have been removed]

Hey gang,

Finished editing a little peice a few days ago.  Most
of the purcussion and instruments except the guitar
and bass are coming out of either the E-MU XL-7 or
it's pal the Audity 2000.  There's some Roland and
Korg synths here and there as well.  Loops are done on
an Electrix Repeater.  It's one big mess is what it
is!  Anyway, enjoy.  Any comments would be
appreciated.  I was going for a dancey/indian ambient
kind of thing.

http://www.zerocrossing.net/mp3s/vishnus_serpent.mp3

Mark Sottilaro

hi all

my very personal wishlist:
- Autoscroll on/off option in Grid Recording + navigations options between 
the different screensets for each bar (basically the possibility to edit a 
bar segment even if it's the not the one playing at the moment)
- sets of shortcuts keys combinations to jump to user definable screensets. 
assigning your most used screensets to key combis would allow to move 
around the OS way faster, without very much wheel scrolling (kind of 
annoying, to me)...

ciao
leo

Something´s been bugging me for a while now thats turning into a bain.
"Save preset to..." window:
When saving presets it´s not posible to move the curser to under the 
catergory (those 3 lettered prefixes before the preset name) or the 
preset name itself, yet its posible in the "copy preset from..." 
window.
I´ve been making my own catergories and know which ones are old and 
can be overwritten but the locations are strewn all over my user banks 
thus having to scroll through all the banks to find a new location. 
Has anyone else experienced this problem or is it my machine? Maybe 
its just the way I´ve organised my presets that needs to be changed.
Thx
:P

Dancing man = Power on while holding Audition  :)

rEalm





"[cYcLoThYmIqUe]" <poumtschak@...>
01/12/2004 01:10 PM
Please respond to xl7

 
        To:     xl7@yahoogroups.com
        cc: 

        Subject:        Re: [xl7] Aaron should make us a new XX-7 OS because....


The ability to define/edit a custom message and logo at boot.

:)

erik_magrini@... wrote:
> These features would be nice:
-- 
Sebastien,
-=-=-=-=-=
We used to write taglines with pencil & paper, my son.

 

Yahoo! Groups Links

To visit your group on the web, go to:
 http://groups.yahoo.com/group/xl7/

To unsubscribe from this group, send an email to:
 xl7-unsubscribe@yahoogroups.com

Your use of Yahoo! Groups is subject to:
 http://docs.yahoo.com/info/terms/ 







The information transmitted is intended only for the person(s)or entity 
to which it is addressed and may contain confidential and/or legally 
privileged material. Delivery of this message to any person other than 
the intended recipient(s) is not intended in any way to waive privilege 
or confidentiality. Any review, retransmission, dissemination or other 
use of , or taking of any action in reliance upon, this information by 
entities other than the intended recipient is prohibited. If you 
receive this in error, please contact the sender and delete the 
material from any computer.

For Translation:

http://www.baxter.com/email_disclaimer


[Non-text portions of this message have been removed]

I got around this by copying an initialized Preset to ALL of my User 
Preset locations when I first got the machine.  That way, when I'm saving 
a new Preset, I only need to look for the  "Init Preset" to know that's a 
safe location to save to.

rEalm





phest2k <tuttle@...>
01/13/2004 06:02 AM
Please respond to xl7

 
        To:     xl7@yahoogroups.com
        cc: 

        Subject:        [xl7] Re: Aaron should make us a new XX-7 OS because....


Something´s been bugging me for a while now thats turning into a bain.
"Save preset to..." window:
When saving presets it´s not posible to move the curser to under the 
catergory (those 3 lettered prefixes before the preset name) or the 
preset name itself, yet its posible in the "copy preset from..." 
window.
I´ve been making my own catergories and know which ones are old and 
can be overwritten but the locations are strewn all over my user banks 
thus having to scroll through all the banks to find a new location. 
Has anyone else experienced this problem or is it my machine? Maybe 
its just the way I´ve organised my presets that needs to be changed.
Thx
:P



 

Yahoo! Groups Links

To visit your group on the web, go to:
 http://groups.yahoo.com/group/xl7/

To unsubscribe from this group, send an email to:
 xl7-unsubscribe@yahoogroups.com

Your use of Yahoo! Groups is subject to:
 http://docs.yahoo.com/info/terms/ 







The information transmitted is intended only for the person(s)or entity 
to which it is addressed and may contain confidential and/or legally 
privileged material. Delivery of this message to any person other than 
the intended recipient(s) is not intended in any way to waive privilege 
or confidentiality. Any review, retransmission, dissemination or other 
use of, or taking of any action in reliance upon, this information by 
entities other than the intended recipient is prohibited. If you 
receive this in error, please contact the sender and delete the 
material from any computer.

For Translation:

http://www.baxter.com/email_disclaimer


[Non-text portions of this message have been removed]

--- In xl7@yahoogroups.com, "dwoodaman" <dwoodaman@y...> wrote:
> Even better would be a way to display and edit the global commands 
> on my computer, especially when I am trying to get my external gear 
> to work better, like with program changes and such.....

This functionality may be possible for Cakewalk users.  A user in 
another E-Mu group has designed a StudioWare panel that allows users 
to edit SOME preset parameters.  I have suggested some other panels.  
I think a global command [master menu] panel would be possible.

I have suggested that he post the panel here for the benefit of other 
Cakewalk users here.  He has made some changes and will probably post 
it here (or I will, with permission) after it is refined.

BTW: I briefly tested the 1st version of the panel.  With it (for 
example), you can alter envelope parameters in real-time, filter 
changes, etc. and have the corresponding sysex parameters recorded in 
your track. (Possible limitation:  I believe this will only work with 
the basic channel.)

Also, if anyone remembers my Randomizer and Parametizer projects 
(proposed/discussed last summer), I am hoping these can be realized 
via StudioWare panels.

Anyone here into designing StudioWare panels and willing to 
coordinate efforts?

--- In xl7@yahoogroups.com, "Stu" <routerman@z...> wrote:
> Here's another one:
> 
> -Send program change when selecting presets. I'm surprised this is
> missing in the first place...

This might be nice if it can be turned off--perhaps on a port/channel 
basis.  Otherwise, it might muck up connected gear.  I'd hate to 
change presets on the E-Mu and have it do program changes on my other 
gear.  But I can see using the master knob to change external patches 
on occasion.

I agree, only if it can be turned off too.

rEalm





--- In xl7@yahoogroups.com, "Stu" <routerman@z...> wrote:
> Here's another one:
> 
> -Send program change when selecting presets. I'm surprised this is
> missing in the first place...

This might be nice if it can be turned off--perhaps on a port/channel 
basis.  Otherwise, it might muck up connected gear.  I'd hate to 
change presets on the E-Mu and have it do program changes on my other 
gear.  But I can see using the master knob to change external patches 
on occasion.



 

Yahoo! Groups Links

To visit your group on the web, go to:
 http://groups.yahoo.com/group/xl7/

To unsubscribe from this group, send an email to:
 xl7-unsubscribe@yahoogroups.com

Your use of Yahoo! Groups is subject to:
 http://docs.yahoo.com/info/terms/ 







The information transmitted is intended only for the person(s)or entity 
to which it is addressed and may contain confidential and/or legally 
privileged material. Delivery of this message to any person other than 
the intended recipient(s) is not intended in any way to waive privilege 
or confidentiality. Any review, retransmission, dissemination or other 
use of, or taking of any action in reliance upon, this information by 
entities other than the intended recipient is prohibited. If you 
receive this in error, please contact the sender and delete the 
material from any computer.

For Translation:

http://www.baxter.com/email_disclaimer


[Non-text portions of this message have been removed]

--- In xl7@yahoogroups.com, "phest2k" <tuttle@l...> wrote:
> I´ve been making my own catergories . . . . [SNIP]

Just a tip I posted many months ago.

When I tweak or create my own presets, I have named them with an 
initial upper case letter.  This way the navigator finds it first.

eg:  arp. --> Arp., bts --> Bts.

I haven't done this in a while, but I did it from the Edit Preset 
Name menu.

Also, I would be interested in other naming conventions people use.

All of my Presets get the category "rlm".   :)  My Presets are all pattern 
specific, so I really don't need any fancy naming conventions.

rEalm
(rlm)





steve_the_composer <smw-mail@...>
01/13/2004 09:04 AM
Please respond to xl7

 
        To:     xl7@yahoogroups.com
        cc: 

        Subject:        [xl7] Renaming preset categories


--- In xl7@yahoogroups.com, "phest2k" <tuttle@l...> wrote:
> I´ve been making my own catergories . . . . [SNIP]

Just a tip I posted many months ago.

When I tweak or create my own presets, I have named them with an 
initial upper case letter.  This way the navigator finds it first.

eg:  arp. --> Arp., bts --> Bts.

I haven't done this in a while, but I did it from the Edit Preset 
Name menu.

Also, I would be interested in other naming conventions people use. 




 

Yahoo! Groups Links

To visit your group on the web, go to:
 http://groups.yahoo.com/group/xl7/

To unsubscribe from this group, send an email to:
 xl7-unsubscribe@yahoogroups.com

Your use of Yahoo! Groups is subject to:
 http://docs.yahoo.com/info/terms/ 







The information transmitted is intended only for the person(s)or entity 
to which it is addressed and may contain confidential and/or legally 
privileged material. Delivery of this message to any person other than 
the intended recipient(s) is not intended in any way to waive privilege 
or confidentiality. Any review, retransmission, dissemination or other 
use of, or taking of any action in reliance upon, this information by 
entities other than the intended recipient is prohibited. If you 
receive this in error, please contact the sender and delete the 
material from any computer.

For Translation:

http://www.baxter.com/email_disclaimer


[Non-text portions of this message have been removed]

--- In xl7@yahoogroups.com, erik_magrini@B... wrote:
> I got around this by copying an initialized Preset to ALL of my
> User Preset locations when I first got the machine.  That way, when
> I'm saving a new Preset, I only need to look for the  "Init Preset"
> to know that's a  safe location to save to.
> 
> rEalm

I adopted this excellent suggestion, rEalm!!!  I recommend it.

Also, when working on presets, or setting up layer configuration, I 
have used all blanks (or other special characters) so the navigator 
finds them first when positioning the cursor under the prefix and 
scrolling.

Option to rEalm's suggestion:  create a bank (or subset) using the 
initialized preset at the end of the ROM.  This way you have ROM 
pointers already set up for that rom.

eg
127^1:     :A.O. V1.0
127^3:     :XL-1 1.4

Hope this helps.

> Anyone here into designing StudioWare panels and willing to 
> coordinate efforts?

I have some experience and interest here.

-m@

Can someone compile al these wishlists and add the file to the Yahoo
Group main page?

-m@

To clarify, that's the Preset I was referring to when I said 
"initialized".

More ideas rehashed:
About once a month I go through and figure out which presets I'm using in 
my Patterns.  I made a simple Excel chart that only has the Preset 
LOcations listed (i.e. 000:0 through 127:3).  Then I go through my 
patterns and check off which Presets are being used.  Any Presets location 
unchecked on my chart get over-written with the initialized Preset, 
thereby freeing up more User memory for my own Presets.  I never thought 
it would be a problem, but I'm actually getting close to using up all of 
my User locations!  Doh!


rEalm







Option to rEalm's suggestion:  create a bank (or subset) using the 
initialized preset at the end of the ROM.  This way you have ROM 
pointers already set up for that rom.

eg
127^1:     :A.O. V1.0
127^3:     :XL-1 1.4

Hope this helps.

 


 


Yahoo! Groups Links

To visit your group on the web, go to:
 http://groups.yahoo.com/group/xl7/

To unsubscribe from this group, send an email to:
 xl7-unsubscribe@yahoogroups.com

Your use of Yahoo! Groups is subject to:
 http://docs.yahoo.com/info/terms/ 







The information transmitted is intended only for the person(s)or entity 
to which it is addressed and may contain confidential and/or legally 
privileged material. Delivery of this message to any person other than 
the intended recipient(s) is not intended in any way to waive privilege 
or confidentiality. Any review, retransmission, dissemination or other 
use of, or taking of any action in reliance upon, this information by 
entities other than the intended recipient is prohibited. If you 
receive this in error, please contact the sender and delete the 
material from any computer.

For Translation:

http://www.baxter.com/email_disclaimer


[Non-text portions of this message have been removed]

"steve_the_composer" wrote:
"Just a tip I posted many months ago.
When I tweak or create my own presets, I have named them with an 
initial upper case letter.  This way the navigator finds it first. 
eg:  arp. --> Arp., bts --> Bts."

 Hehe,
 That was what inspired me to do it!

"I haven't done this in a while, but I did it from the Edit Preset 
Name menu."

 Naming the preset is not the problem. It´s not being able to use the 
catergories to weed out the old unused presets thats annoying.

"Also, I would be interested in other naming conventions people use."
Me too.
I thought the upper-case tip was a good one (thx) so I use it now for 
presets that should NOT be overwritten ....Its a nightmare going back 
to old patterns/songs and esp. multisetups and fiding all the presets 
don´t fit and throw the mix right out the window.
 I use KIK/SNR/HHT/TOM/CYM/PAD/BAS.. etc in a default multisetup - 
Like a canvas. SNR for example says to me :
dont overwrite - track 2 - sounds like something that could pass as a 
snare.
Any sort of sketchboard sounds that are evolving but aren´t specificly 
used I put the uppercase only for the first letter in the catergory.
e.g. 
don´t overwrite:PAD
sketchboard:Pad
overwrite:pad

The trouble is that my userbanks are now full of uppercase (mostly 
sketchboard)presets so im back where i started ;)
 I do alot of "save preset to" with  drum kits so that my desired 
intrument is at C3. It makes on-the-fly grid recording/editing quicker 
IMO.
The catergory feature is not everyones cup of tea but it goes well 
with my style of working.
Anymore tips on preset/track/pattern organisation much appreciated.
(I´m really unorganised BTW)
:P

There's one there already!

rEalm





"Matt Picone" <matman@...>
01/13/2004 10:04 AM
Please respond to xl7

 
        To:     xl7@yahoogroups.com
        cc: 

        Subject:        RE: [xl7] Re: Aaron should make us a new XX-7 OS because....


Can someone compile al these wishlists and add the file to the Yahoo
Group main page?

-m@


 


Yahoo! Groups Links

To visit your group on the web, go to:
 http://groups.yahoo.com/group/xl7/

To unsubscribe from this group, send an email to:
 xl7-unsubscribe@yahoogroups.com

Your use of Yahoo! Groups is subject to:
 http://docs.yahoo.com/info/terms/ 







The information transmitted is intended only for the person(s)or entity 
to which it is addressed and may contain confidential and/or legally 
privileged material. Delivery of this message to any person other than 
the intended recipient(s) is not intended in any way to waive privilege 
or confidentiality. Any review, retransmission, dissemination or other 
use of, or taking of any action in reliance upon, this information by 
entities other than the intended recipient is prohibited. If you 
receive this in error, please contact the sender and delete the 
material from any computer.

For Translation:

http://www.baxter.com/email_disclaimer


[Non-text portions of this message have been removed]

one thing I would like to see for the Command Stations
is the ability to scale the internal digital headroom.

as it stands, it works quite well for multi-timbral use
with many voices playing, and those peaky resonant
Z-planes.

that said, it does not work as well when the CS is
being used for singlular, solo voices in a non multi-
timbral context.


cheers,
aeon

Gonna be hard to do.  One thing I noticed, is that the Preset Instruments 
(samples) themselves are recorded at about -14dBFS, so right from the bat 
the samples are more or less pretty quiet.

rEalm





aeon <aeonlux@...>
01/13/2004 11:10 AM
Please respond to xl7

 
        To:     xl7@yahoogroups.com
        cc: 

        Subject:        Re: [xl7] Re: Aaron should make us a new XX-7 OS because....


one thing I would like to see for the Command Stations
is the ability to scale the internal digital headroom.

as it stands, it works quite well for multi-timbral use
with many voices playing, and those peaky resonant
Z-planes.

that said, it does not work as well when the CS is
being used for singlular, solo voices in a non multi-
timbral context.


cheers,
aeon


 

Yahoo! Groups Links

To visit your group on the web, go to:
 http://groups.yahoo.com/group/xl7/

To unsubscribe from this group, send an email to:
 xl7-unsubscribe@yahoogroups.com

Your use of Yahoo! Groups is subject to:
 http://docs.yahoo.com/info/terms/ 







The information transmitted is intended only for the person(s)or entity 
to which it is addressed and may contain confidential and/or legally 
privileged material. Delivery of this message to any person other than 
the intended recipient(s) is not intended in any way to waive privilege 
or confidentiality. Any review, retransmission, dissemination or other 
use of, or taking of any action in reliance upon, this information by 
entities other than the intended recipient is prohibited. If you 
receive this in error, please contact the sender and delete the 
material from any computer.

For Translation:

http://www.baxter.com/email_disclaimer


[Non-text portions of this message have been removed]

on 1/13/04 11:52 AM, erik_magrini@... wrote:

> Gonna be hard to do.  One thing I noticed, is that the Preset Instruments
> (samples) themselves are recorded at about -14dBFS, so right from the bat
> the samples are more or less pretty quiet.

how do you know that given there is no means to access
the samples directly, without being gain-staged by
the engine itself?

my guess is the samples are at full scale (or close to
it), and that -14dbFS you are experiencing is a function
of the scaled back digital headroom.

as always, I could be wrong! ;)


cheers,
aeon

I am WAY too dumb to design those panels, but I would LOVE to use 
them.....
d
--- In xl7@yahoogroups.com, "steve_the_composer" <smw-mail@p...> 
wrote:
> --- In xl7@yahoogroups.com, "dwoodaman" <dwoodaman@y...> wrote:
> > Even better would be a way to display and edit the global 
commands 
> > on my computer, especially when I am trying to get my external 
gear 
> > to work better, like with program changes and such.....
> 
> This functionality may be possible for Cakewalk users.  A user in 
> another E-Mu group has designed a StudioWare panel that allows 
users 
> to edit SOME preset parameters.  I have suggested some other 
panels.  
> I think a global command [master menu] panel would be possible.
> 
> I have suggested that he post the panel here for the benefit of 
other 
> Cakewalk users here.  He has made some changes and will probably 
post 
> it here (or I will, with permission) after it is refined.
> 
> BTW: I briefly tested the 1st version of the panel.  With it (for 
> example), you can alter envelope parameters in real-time, filter 
> changes, etc. and have the corresponding sysex parameters recorded 
in 
> your track. (Possible limitation:  I believe this will only work 
with 
> the basic channel.)
> 
> Also, if anyone remembers my Randomizer and Parametizer projects 
> (proposed/discussed last summer), I am hoping these can be 
realized 

> via StudioWare panels.
> 
> Anyone here into designing StudioWare panels and willing to 
> coordinate efforts?

i would be happy to help test...........
d
--- In xl7@yahoogroups.com, "Matt Picone" <matman@m...> wrote:

> > Anyone here into designing StudioWare panels and willing to 
> > coordinate efforts?
> 
> I have some experience and interest here.
> 
> -m@

Aaron totally rocks. I had wondered about that email address... Kudos 
to Sean for bringing him back for OS 2, too. (Best of luck with the 
new Apple gig, Aaron - as a Mac guy myself I hope you have a long and 
mutually beneficial relationship).

I'd like to add:

- The ability to transpose part of a track instead of the whole 
thing. This could use the same bar-selection screen that cut, copy 
and paste use. Currently I'm cutting the parts I don't want to 
transpose, transposing, and then pasting the untransposed parts back 
in. It's just as tedious as it sounds, and one of the few times the 
Command Station gets in my way when creating tracks.

- Some kind of realtime transpose control would be really cool too.

- MIDI messages to change patterns, like Matt Picone said.

And:

--- In xl7@yahoogroups.com, Leo Cavallo <leocavallo@g...> wrote:
> - Autoscroll on/off option in Grid Recording + navigations options 
between 
> the different screensets for each bar (basically the possibility to 
edit a 
> bar segment even if it's the not the one playing at the moment)

Yes, please. The Loop mode is nice to have but this is really the 
ideal solution.

From rEalms's list (all good suggestions, btw):

> - A way to copy arp data to a track as MIDI notes.

This would be nice. I suspect the sequencer/synth segregation may get 
in the way of this, however.

> - The option to turn real-time Filter Resonance on or off. I for 
one,
thought it sounded fine and would like to see this re-added to the OS
again.

I missed this. Was this in a beta OS or something?

Maybe :)

rEalm




> - The option to turn real-time Filter Resonance on or off. I for 
one,
thought it sounded fine and would like to see this re-added to the OS
again.

I missed this. Was this in a beta OS or something?


 







The information transmitted is intended only for the person(s)or entity 
to which it is addressed and may contain confidential and/or legally 
privileged material. Delivery of this message to any person other than 
the intended recipient(s) is not intended in any way to waive privilege 
or confidentiality. Any review, retransmission, dissemination or other 
use of , or taking of any action in reliance upon, this information by 
entities other than the intended recipient is prohibited. If you 
receive this in error, please contact the sender and delete the 
material from any computer.

For Translation:

http://www.baxter.com/email_disclaimer


[Non-text portions of this message have been removed]

Heheheh. Bastard. I agree, it would be nice to have another realtime 
control axis for the filters. Especially since they lack the third 
axis of true Z-plane filters. Even if it sounds funky, sometimes that 
can be useful in unexpected ways.

If the synthesis engine can be tweaked, it'd be nice to get a sample-
reverse option, even if it used two or four voices of polyphony. 
That's probably a lot to ask, though.

--- In xl7@yahoogroups.com, erik_magrini@B... wrote:
> Maybe :)
> 
> rEalm
> 
> 
> 
> 
> > - The option to turn real-time Filter Resonance on or off. I for 
> one,
> thought it sounded fine and would like to see this re-added to the 
OS
> again.
> 
> I missed this. Was this in a beta OS or something?
> 
> 
>  
> 
> 
> 
> 
> 
> 
> 
> The information transmitted is intended only for the person(s)or 
entity 
> to which it is addressed and may contain confidential and/or 
legally 
> privileged material. Delivery of this message to any person other 
than 
> the intended recipient(s) is not intended in any way to waive 
privilege 
> or confidentiality. Any review, retransmission, dissemination or 
other 
> use of , or taking of any action in reliance upon, this information 
by 

> entities other than the intended recipient is prohibited. If you 
> receive this in error, please contact the sender and delete the 
> material from any computer.
> 
> For Translation:
> 
> http://www.baxter.com/email_disclaimer
> 
> 
> [Non-text portions of this message have been removed]

--- robotchas <robotchas@...> wrote:
> > - The option to turn real-time Filter Resonance on or off. I
> > for one, thought it sounded fine and would like to see this
> > re-added to the OS again.
> 
> I missed this. Was this in a beta OS or something?

Yeah, we had prototyped a way to do realtime resonance cheaply, but it
had some zipper-noise artifacts.  Even worse though, it also introduced
several serious hard to track down bugs.  This is something I will
probably not be able to fix.

-Aaron

__________________________________
Do you Yahoo!?
Yahoo! Hotjobs: Enter the "Signing Bonus" Sweepstakes
http://hotjobs.sweepstakes.yahoo.com/signingbonus

Is this the same code that was used in EOS4.7?

|-----Original Message-----
|From: Aaron Eppolito [mailto:synthesis77@...]
|Sent: 13 January 2004 22:37
|To: xl7@yahoogroups.com
|Subject: Re: [xl7] Re: Aaron should make us a new XX-7 OS because....
|
|
|--- robotchas <robotchas@...> wrote:
|> > - The option to turn real-time Filter Resonance on or off. I
|> > for one, thought it sounded fine and would like to see this
|> > re-added to the OS again.
|> 
|> I missed this. Was this in a beta OS or something?
|
|Yeah, we had prototyped a way to do realtime resonance cheaply, but it
|had some zipper-noise artifacts.  Even worse though, it also introduced
|several serious hard to track down bugs.  This is something I will
|probably not be able to fix.
|
|-Aaron
|
|__________________________________
|Do you Yahoo!?
|Yahoo! Hotjobs: Enter the "Signing Bonus" Sweepstakes
|http://hotjobs.sweepstakes.yahoo.com/signingbonus
|
| 
|
|Yahoo! Groups Links
|
|To visit your group on the web, go to:
| http://groups.yahoo.com/group/xl7/
|
|To unsubscribe from this group, send an email to:
| xl7-unsubscribe@yahoogroups.com
|
|Your use of Yahoo! Groups is subject to:
| http://docs.yahoo.com/info/terms/ 
|

Same idea, different implementation.  The XL-7 has 12th order filters
with dynamic allocation, the E4 does not.

-Aaron

--- Stu <routerman@...> wrote:
> Is this the same code that was used in EOS4.7?

__________________________________
Do you Yahoo!?
Yahoo! Hotjobs: Enter the "Signing Bonus" Sweepstakes
http://hotjobs.sweepstakes.yahoo.com/signingbonus

> But, alas, one that will never happen.  USB is
> host/slave, unlike
> firewire.  It would be the same as trying to plug
> your USB mouse into
> your USB computer keyboard and expecting something
> to happen.

that's the way my mouse is connected to my computer.
over the usb port in my keyboard. microsoft trackball
mouse, microsoft ergonomic keyboard, apple computer.
it works fine ;o)

but i know what you mean.

__________________________________________________________________

Gesendet von Yahoo! Mail - http://mail.yahoo.de
Logos und Klingelt\ufffdne f\ufffdrs Handy bei http://sms.yahoo.de

--- G e r \ufffd u s c h d i c h t e <geraeuschdichte@...> wrote:
> that's the way my mouse is connected to my computer.
> over the usb port in my keyboard. microsoft trackball
> mouse, microsoft ergonomic keyboard, apple computer.
> it works fine ;o)
> 
> but i know what you mean.

Touch\ufffd.  =)  I suppose the better example would be plugging your USB
keyboard into your USB hard drive and expecting to be able to edit text
files...  =)

-Aaron

__________________________________
Do you Yahoo!?
Yahoo! Hotjobs: Enter the "Signing Bonus" Sweepstakes
http://hotjobs.sweepstakes.yahoo.com/signingbonus

Has anyone had a chance to work on this yet? Not complaining! Just 
wondering...........
thx
--- In xl7@yahoogroups.com, "Matt Picone" <matman@m...> wrote:

> > Anyone here into designing StudioWare panels and willing to 
> > coordinate efforts?
> 
> I have some experience and interest here.
> 
> -m@