Yahoo Groups archive
Thread
2004-06-14 by taipeiwalkerhk
Hi, I am using MP-7 with OS 2.0 and here is my problem: I want to "Grid" record for a LN=4 Pattern. Okay done ! If I found bar 3 is not perfect and I wanted to add some HH on it. However, the BAR indicator keeps running that means it will loop Bar: 01.1 to 04.4. How can I tell MP7 just loop 03.1 to 03.4 as I just want to modify Bar 3 only ? Any hints ? Cowby
2004-06-14 by erik_magrini@Baxter.com
First, scroll to the 3rd measure while the Pattern is stopped. Then press
and hold TAP, and while holding this, press SELECT (left loop point) and
EDIT (right loop point). Then press and hold TAP and then press STOP to
enter loop mode. The pattern will now loop only measure 3 and you can
enter grid mode and and work on just that measure. With practice, you can
get quick enough to do this without stopping the sequencer, so it's very
easy to use.
rEalm
taipeiwalkerhk <taipeiwalkerhk@...>
06/14/2004 07:04 AM
Please respond to xl7
To: xl7@yahoogroups.com
cc: Subject: [xl7] Grid recording with Loop point ? Hi, I am using MP-7 with OS 2.0 and here is my problem: I want to "Grid" record for a LN=4 Pattern. Okay done ! If I found bar 3 is not perfect and I wanted to add some HH on it. However, the BAR indicator keeps running that means it will loop Bar: 01.1 to 04.4. How can I tell MP7 just loop 03.1 to 03.4 as I just want to modify Bar 3 only ? Any hints ? Cowby Yahoo! Groups Links The information transmitted is intended only for the person(s)or entity to which it is addressed and may contain confidential and/or legally privileged material. Delivery of this message to any person other than the intended recipient(s) is not intended in any way to waive privilege or confidentiality. Any review, retransmission, dissemination or other use of , or taking of any action in reliance upon, this information by entities other than the intended recipient is prohibited. If you receive this in error, please contact the sender and delete the material from any computer. For Translation: http://www.baxter.com/email_disclaimer [Non-text portions of this message have been removed]
2004-06-14 by Cowby Cowby
It Works! But I've found another way :
Pattern in Edit mode : Temporary bar Region.
Anyway, thanks!
---------------------------------
First, scroll to the 3rd measure while the Pattern is
stopped. Then press
and hold TAP, and while holding this, press SELECT
(left loop point) and
EDIT (right loop point). Then press and hold TAP and
then press STOP to
enter loop mode. The pattern will now loop only
measure 3 and you can
enter grid mode and and work on just that measure.
With practice, you can
get quick enough to do this without stopping the
sequencer, so it's very
easy to use.
rEalm
taipeiwalkerhk <taipeiwalkerhk@...>
06/14/2004 07:04 AM
Please respond to xl7
To: xl7@yahoogroups.com
cc: Subject: [xl7] Grid recording with Loop point ? Hi, I am using MP-7 with OS 2.0 and here is my problem: I want to "Grid" record for a LN=4 Pattern. Okay done ! If I found bar 3 is not perfect and I wanted to add some HH on it. However, the BAR indicator keeps running that means it will loop Bar: 01.1 to 04.4. How can I tell MP7 just loop 03.1 to 03.4 as I just want to modify Bar 3 only ? Any hints ? Cowby Yahoo! Groups Links The information transmitted is intended only for the person(s)or entity to which it is addressed and may contain confidential and/or legally privileged material. Delivery of this message to any person other than the intended recipient(s) is not intended in any way to waive privilege or confidentiality. Any review, retransmission, dissemination or other use of , or taking of any action in reliance upon, this information by entities other than the intended recipient is prohibited. If you receive this in error, please contact the sender and delete the material from any computer. For Translation: http://www.baxter.com/email_disclaimer [Non-text portions of this message have been removed] Yahoo! Groups Sponsor ADVERTISEMENT --------------------------------- Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/xl7/ To unsubscribe from this group, send an email to: xl7-unsubscribe@yahoogroups.com Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. _________________________________________________________ \ufffd\ufffd\ufffd\ufffd\ufffd\u07a1B\ufffd\ufffd\ufffdq\ufffdB\ufffdp\ufffdP\ufffdP... \ufffd\ufffd\ufffd\ufffd\ufffda\ufffdn \ufffd\ufffd\ufffd\u07f3s� http://us.rd.yahoo.com/evt=22281/*http://ringtone.yahoo.com.hk/
2004-06-14 by Cowby Cowby
It Works! But I've found another way :
Pattern in Edit mode : Temporary bar Region.
Anyway, thanks!
---------------------------------
First, scroll to the 3rd measure while the Pattern is
stopped. Then press
and hold TAP, and while holding this, press SELECT
(left loop point) and
EDIT (right loop point). Then press and hold TAP and
then press STOP to
enter loop mode. The pattern will now loop only
measure 3 and you can
enter grid mode and and work on just that measure.
With practice, you can
get quick enough to do this without stopping the
sequencer, so it's very
easy to use.
rEalm
taipeiwalkerhk <taipeiwalkerhk@...>
06/14/2004 07:04 AM
Please respond to xl7
To: xl7@yahoogroups.com
cc: Subject: [xl7] Grid recording with Loop point ? Hi, I am using MP-7 with OS 2.0 and here is my problem: I want to "Grid" record for a LN=4 Pattern. Okay done ! If I found bar 3 is not perfect and I wanted to add some HH on it. However, the BAR indicator keeps running that means it will loop Bar: 01.1 to 04.4. How can I tell MP7 just loop 03.1 to 03.4 as I just want to modify Bar 3 only ? Any hints ? Cowby Yahoo! Groups Links The information transmitted is intended only for the person(s)or entity to which it is addressed and may contain confidential and/or legally privileged material. Delivery of this message to any person other than the intended recipient(s) is not intended in any way to waive privilege or confidentiality. Any review, retransmission, dissemination or other use of , or taking of any action in reliance upon, this information by entities other than the intended recipient is prohibited. If you receive this in error, please contact the sender and delete the material from any computer. For Translation: http://www.baxter.com/email_disclaimer [Non-text portions of this message have been removed] Yahoo! Groups Sponsor ADVERTISEMENT --------------------------------- Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/xl7/ To unsubscribe from this group, send an email to: xl7-unsubscribe@yahoogroups.com Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. _________________________________________________________ \ufffd\ufffd\ufffd\ufffd\ufffd\u07a1B\ufffd\ufffd\ufffdq\ufffdB\ufffdp\ufffdP\ufffdP... \ufffd\ufffd\ufffd\ufffd\ufffda\ufffdn \ufffd\ufffd\ufffd\u07f3s� http://us.rd.yahoo.com/evt=22281/*http://ringtone.yahoo.com.hk/
2004-06-14 by erik_magrini@Baxter.com
Same thing, I just gave you the key shortcuts :)
rEalm
"Cowby Cowby" <taipeiwalkerhk@...>
06/14/2004 10:02 AM
Please respond to xl7
To: xl7@yahoogroups.com
cc: Subject: Re: [xl7] Grid recording with Loop point ?
It Works! But I've found another way :
Pattern in Edit mode : Temporary bar Region.
Anyway, thanks!
---------------------------------
First, scroll to the 3rd measure while the Pattern is
stopped. Then press
and hold TAP, and while holding this, press SELECT
(left loop point) and
EDIT (right loop point). Then press and hold TAP and
then press STOP to
enter loop mode. The pattern will now loop only
measure 3 and you can
enter grid mode and and work on just that measure.
With practice, you can
get quick enough to do this without stopping the
sequencer, so it's very
easy to use.
rEalm
taipeiwalkerhk <taipeiwalkerhk@...>
06/14/2004 07:04 AM
Please respond to xl7
To: xl7@yahoogroups.com
cc:
Subject: [xl7] Grid recording with Loop
point ?
Hi,
I am using MP-7 with OS 2.0 and here is my problem:
I want to "Grid" record for a LN=4 Pattern. Okay
done !
If I found bar 3 is not perfect and I wanted to add
some HH on it.
However, the BAR indicator keeps running that means it
will loop Bar:
01.1 to 04.4. How can I tell MP7 just loop 03.1 to
03.4 as I just
want to modify Bar 3 only ?
Any hints ?
Cowby
Yahoo! Groups Links
The information transmitted is intended only for the
person(s)or entity
to which it is addressed and may contain confidential
and/or legally
privileged material. Delivery of this message to any
person other than
the intended recipient(s) is not intended in any way
to waive privilege
or confidentiality. Any review, retransmission,
dissemination or other
use of , or taking of any action in reliance upon,
this information by
entities other than the intended recipient is
prohibited. If you
receive this in error, please contact the sender and
delete the
material from any computer.
For Translation:
http://www.baxter.com/email_disclaimer
[Non-text portions of this message have been removed]
Yahoo! Groups Sponsor ADVERTISEMENT
---------------------------------
Yahoo! Groups Links
To visit your group on the web, go to:
http://groups.yahoo.com/group/xl7/
To unsubscribe from this group, send an email to:
xl7-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to the Yahoo!
Terms of Service.
_________________________________________________________
必殺技、飲歌、小星星...
浪漫鈴聲 情心連繫
http://us.rd.yahoo.com/evt=22281/*http://ringtone.yahoo.com.hk/
------------------------ Yahoo! Groups Sponsor --------------------~-->
Create your own customized LAUNCHcast Internet Radio station.
Rate your favorite Artists, Albums, and Songs. Skip songs. Click here!
http://us.click.yahoo.com/5ddjqC/xA5HAA/n1hLAA/pWZylB/TM
--------------------------------------------------------------------~->
Yahoo! Groups Links
[Non-text portions of this message have been removed]