Emu XL-7 & MP-7 User's Group

when Im making a pattern and I use the headphones the panning works fine.  
but when I go into some speakers its like i have a short in the headphone jack.  
when I pan a track to the right it cant be heard.  I have messed with the 
cord and try to put it in like halfway and i can hear out the right side.  its 
not the cord because i tried 3 different ones.  I dont know why it works fine 
with the headphones but not with a cord into speakers. any ideas? and is it hard 
to replace the jack?..thanks


[Non-text portions of this message have been removed]

This will sounds very stupid, but are you sure you're the right outputs? 
I've accidentally plugged into the wrong outputs in other gear before and 
not realized it...  Maybe it's an amp or speaker issue?  Did this just 
start happening recently?

rEalm





jm213213@...
06/11/2003 10:02 AM
Please respond to xl7

 
        To:     xl7@yahoogroups.com
        cc: 

        Subject:        [xl7] problem w/ output


when Im making a pattern and I use the headphones the panning works fine. 
but when I go into some speakers its like i have a short in the headphone 
jack. 
when I pan a track to the right it cant be heard.  I have messed with the 
cord and try to put it in like halfway and i can hear out the right side. 
its 
not the cord because i tried 3 different ones.  I dont know why it works 
fine 
with the headphones but not with a cord into speakers. any ideas? and is 
it hard 
to replace the jack?..thanks


[Non-text portions of this message have been removed]



To unsubscribe from this group, send an email to:
xl7-unsubscribe@yahoogroups.com

 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ 







[Non-text portions of this message have been removed]

ive tried coming out of the headphone jack and out of the different outputs 
from the back of the xl7.  ive always used headphones till recently.  Ive tried 
it out of my computer and out of a different mixer.  right now im coming out 
of the  main output R and it is working.. although the panning is not working 
at all.. maybe because of my computer set up???  but if i come out of main 
output L im still getting the same problem..   but still it could be me doign 
something wrong that i dont know..


[Non-text portions of this message have been removed]

So you're only using one output, not both stereo main outs?  Here's an 
excerpt from the manual (page 16) that might help you out more:

"The Right Main output jack carries a mono mix of the left and right 
channels when the Left Main plug is not plugged in.
The Left Main output jack is a stereo jack carrying both channels when the 
right output jack is empty."

rEalm





jm213213@...
06/11/2003 10:12 AM
Please respond to xl7

 
        To:     xl7@yahoogroups.com
        cc: 

        Subject:        Re: [xl7] problem w/ output


ive tried coming out of the headphone jack and out of the different 
outputs 
from the back of the xl7.  ive always used headphones till recently.  Ive 
tried 
it out of my computer and out of a different mixer.  right now im coming 
out 
of the  main output R and it is working.. although the panning is not 
working 
at all.. maybe because of my computer set up???  but if i come out of main 

output L im still getting the same problem..   but still it could be me 
doign 
something wrong that i dont know..


[Non-text portions of this message have been removed]



To unsubscribe from this group, send an email to:
xl7-unsubscribe@yahoogroups.com

 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ 







[Non-text portions of this message have been removed]

ahh ok, thats why i can hear everything out the right... i still am having a 
problem w/ stereo then.  cause when im coming out of the L output tracks that 
are panned to the right side are barely coming out but when i pull the cord 
like halfway out and hold it there i can hear it out of the right.  sorry if im 
not making sense but i dont know all the correct terms.  and thanks for your 
help realm


[Non-text portions of this message have been removed]

That's because you're probably using just a normal 1/4" cord right, not a 
TRS one?  The normal one can only "hear" one channel, L or R depending on 
how far it's pushed into the jack.  To hear both from only the one output, 
you'd need to get a stereo cable, or an "Insert y" cable.   Why not just 
use two cables, one for each output?  Much easier....

rEalm





jm213213@...
06/11/2003 10:33 AM
Please respond to xl7

 
        To:     xl7@yahoogroups.com
        cc: 

        Subject:        Re: [xl7] problem w/ output


ahh ok, thats why i can hear everything out the right... i still am having 
a 
problem w/ stereo then.  cause when im coming out of the L output tracks 
that 
are panned to the right side are barely coming out but when i pull the 
cord 
like halfway out and hold it there i can hear it out of the right.  sorry 
if im 
not making sense but i dont know all the correct terms.  and thanks for 
your 
help realm


[Non-text portions of this message have been removed]



To unsubscribe from this group, send an email to:
xl7-unsubscribe@yahoogroups.com

 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ 







[Non-text portions of this message have been removed]

word... i got you now realm...  thanks


[Non-text portions of this message have been removed]