Ok. so if this "ID" is set with the strap/cable, have tried just moving the cable? If moving the cable changes the "path" then again its not your boards and you just have a bad cable! :) -omar --- sent from iPhone On Jul 10, 2012, at 10:05 AM, Terje Winther <terje.winther@...> wrote: > It has to be two boards, or the error message stops the machine. > > > Terje > > > Den 10. juli. 2012 kl. 14.45 skrev Christophe JANOT: > >> >> >> Try with only the other board. >> >> Envoyé de mon iPhone >> >> Le 10 juil. 2012 à 14:41, Terje Winther <terje.winther@wintherstormer.no> a écrit : >> >>> >>> The Matrix-12 is smarter than us: >>> >>> I tried to start with only one voice card connected, but was given an error message, and no sound comes out. >>> >>> Terje >>> >>> >>> Den 10. juli. 2012 kl. 13.53 skrev Omar Torres: >>> >>>> >>>> >>>> im not convinced yet you have a bad voiceboard >>>> >>>> can the Matrix-12 boot and run with only one >>>> voice-card connected? If so, try each board >>>> individually and see what your results are. >>>> >>>> >>>> -omar >>>> >>>> --- >>>> sent from iPhone >>>> >>>> On Jul 10, 2012, at 7:45 AM, Terje Winther <terje.winther@...> wrote: >>>> >>>>> >>>>> >>>>>> Can you send me picture of the top right part of each of the voice board ? I want to see if they do not share the same ID. Here is the reason : >>>>>> >>>>>> Each voice board had his own id. This id is set with a strap. So when you swap the board, you didn't swap anything since each board kept his previous ID. >>>>> >>>>> Dang! That means that there is something wrong with the voice card. >>>>> OK, thanks, closer to the problem now. >>>>> >>>>> >>>>>> __ >>>>> >>>>> Terje Winther >>>>> terje.winther@wintherstormer.no >>>>> http://www.wintherstormer.no/ >>>>> >>>>> >>>>> >>>>> >>>>> >>>> >>> >>> Terje Winther >>> terje.winther@... >>> http://www.wintherstormer.no/ >>> >>> >>> >>> >>> >> > > Terje Winther > terje.winther@... > http://www.wintherstormer.no/ > > > > >
Message
Re: [xpantastic] only one board active
2012-07-10 by Omar Torres