Xpantastic!

Hi All,

>unison does not require multi-mode.
>all you have to do is assign all 6 voices to
>the same zone (in this case zone 1) and then
>set zone 1 to one of the unison modes instead
>of rotate or reset mode
>much easier than having to mess with multi-mode.

-omar

This is true. You can set all the zone stuff up ( globaly) in the master page 
section, however these settings are not output with a patch dump. 
Patch dumps only send single patch and multi patch settings, none of the master
stuff.

>don´t know what the difference w/ the Matrix-12 and the 2nd voice board is 
>though ...

AFAIK The Matrix 12 works the same way as the Xpander. You can assign 
any number of voices ( up to 12 )  to one of the 6 Zones.  

> M12 - Xpander Comparison

I have owned a M12 for a long time. I find the modulation List a great thing, 
but I don't see the detune as that much of an advantage, unless 
you just gotta have a "Hover" type sound.
Often I have adjusted the detunes to what I think is a perfect sound, only to 
reset them all to 0 once I play the sound with a band or midi sequence context . 



Best 

Karl