There are differences between "Pedal Inputs" #1 + #2,- both work like Levers 1 + 2 but Pedal #2 and Lever 2 are universal controllers while Pedal #1 and Lever 1 are existing independently and in each voice.
If I defeat midi for the pedal input 1 w/ the Oberheim pedal connected and route pedal 1 as modulation source to the filters cutoff frequency, this is modulated by the pedal continuously because it�s a pedal and not a open/close switch.
The Oberheim pedal acts like a lever in this case and because it�s "Pedal #1", also relatively to each voice.
A Lever is also only a pot and doesn�t behave like a on/off switch.
Seems, you guys have the wrong pedals, - that�s all.
Tony Cappellini schrieb:
> It�s possible to connect momentary switches as also pedals w/ a pot inside to the Xpander.
> Momentary switches and pedals can be routed as modulation sources Pedal #1 / Pedal #2 to any modulation destination like VCAs, >Filter cutoff, resonance and so on.
Yes- but these will only provide on/off type of modulation, not a
smooth transition between a min and max value, like a pot would.
Perhaps you could smooth out the threshold between the on/off using
the Tracking Gens.