This folder contains several *.mid files to test as follows:

==============================================================

(1) CZ-101A.MID
--contains 1 count-in measure followed by 32 sets of tone data 
  and a 1 measure progression [33 measures total]
--timbre/tone data is in CZ-101/1000/3000/5000 sysex format [also plays on CZ-1]
--data is sent to the CZ temporary sound area [so as not to overwrite stored presets]
--data and progression are on channel 1

(2) CZ-1A32.MID
--contains 1 count-in measure followed by 32 sets of tone data and a 1 measure progression [33 measures total]
--timbre/tone data is in CZ-1 sysex format
--data is sent to the CZ temporary sound area [so as not to overwrite stored presets]
--data and progression are on channel 1

(3) CZ-1MODE.MID
--contains sysex data to switch CZ-1 modes (normal, tone mix, key split, op-mem)

==============================================================

These are designed to test features on the CZ-1.  
File (1) should also work on the CZ-101 --> CZ-5000 series.

For files (1) and (2) to work, memory protection needs to be OFF.  
Patch data is send to the temporary sound area and is not stored in internal memory slots.

The files are designed to be played on a midi sequencer (hardware or software)
 that has the capability of sending sysex data.

==============================================================