#PRINTER=Quad7800
#CURVE_NAME= Carbon100 #Based on Carbon Tissue #230, 14 grams of Black Cat Ink + 2 grams of Mixol #23 Dunkelbraum, with tissue coated to a wet height of 0.9mm. 
#Profile when printing a step wedge gives a DR (density range) of approximately log 2.05.
#With Tissue #230 sensitize with a 4% potassium dichromate solution, diluted 1+1 with acetone, approximately 10 ml per 8X10 sheet, applied in two coatings with a roller. 350 ULF units.
#Profile as shown is straight line, i.e. not linearized.

GRAPH_CURVE=YES
N_OF_INKS=8
DEFAULT_INK_LIMIT=100
LIMIT_K=26
LIMIT_C=1
LIMIT_M=1
LIMIT_Y=31
LIMIT_LC=1
LIMIT_LM=1
LIMIT_LK=44
LIMIT_LLK=1

GRAY_HIGHLIGHT=4
GRAY_SHADOW=4
GRAY_GAMMA= 1

CURVE_K= "0;0 100;100"
COPY_CURVE_C=K
COPY_CURVE_M=K
COPY_CURVE_Y=K
COPY_CURVE_LC=K
COPY_CURVE_LM=K
COPY_CURVE_LK=K
COPY_CURVE_LLK=K