#
#  quadtone curve descriptor file for epson 4800 piezography k7 ink set 
#  
#
# the printer name
# the curve name
#   no spaces or special characters, except - or _  (dash or underscore)
#
PRINTER=Quad4800-K7
CURVE_NAME=
#
#
# turn on calibration when calibrating for paper; turn off after linearizing
#
CALIBRATION=NO
#
GRAPH_CURVE=YES
#
# number of inks must be 4, 6, or 7
# the ink limits are percentages
#   usually they are all the same but they can be individually set
#
N_OF_INKS=8
DEFAULT_INK_LIMIT=50
BOOST_K=60
LIMIT_K=
LIMIT_C=
LIMIT_M=
LIMIT_Y=
LIMIT_LC=
LIMIT_LM=
LIMIT_LK=
LIMIT_LLK=0
#
#  Describe Usage of each Ink: K,C,M,Y,LC,LM,LK
#    All Inks of Printer must be listed
#
#
# Gray Partition Information
#  use ink names: K,C,M,Y,LC,LM,LK
#
N_OF_GRAY_PARTS=7
GRAY_INK_1=K
GRAY_VAL_1=100
#
GRAY_INK_2=C
GRAY_VAL_2=45
#
GRAY_INK_3=M
GRAY_VAL_3=13.13
#
GRAY_INK_4=Y
GRAY_VAL_4=1
#
GRAY_INK_5=LC
GRAY_VAL_5=25.5
#
GRAY_INK_6=LM
GRAY_VAL_6=4.02
#
GRAY_INK_7=LK
GRAY_VAL_7=1.74
#
GRAY_INK_8=
GRAY_VAL_8=
#
GRAY_HIGHLIGHT=4
GRAY_SHADOW=8
#
GRAY_OVERLAP=10
GRAY_GAMMA=1
GRAY_CURVE=
#
# Unused Inks
#
N_OF_UNUSED=1
UNUSED_INK_1=LLK
#
# the following is a special UltraChrome ink flag
# it copies the light-black curves to the light-cyan and light-magenta inks.
# this insures that the LC and LM inks are used to directly neutralize
# the color of the light-black.
# the color balance of inks is controlled by the LIMIT_... values above.
#
UC_NEUTRALIZER=NO
#
# delete LINEARIZE line before calibrating
LINEARIZE="94.32 87.31 78.61 71.54 65.13 59.51 54.03 49.74 45.84 42.55 39.65 37.19 34.37 31.68 29 27.21 25.36 23.14 21.31 19.48 17.3"