# Lou Dina - July 30, 2011


# Notes: This profile is based on 2880 dpi, uni-directional, 16-bit, matte paper selections in QTR driver.
# PRINTER=Quad1400
# Curve by Lou Dina

# Epson Premium Glossy Photo Paper - Claria OEM inkset


CURVE_NAME=1400CL-EpPrGloss-Neutral   
GRAPH_CURVE=YES
N_OF_INKS=6
DEFAULT_INK_LIMIT=100
BOOST_K=35
LIMIT_K=20
LIMIT_C=2
LIMIT_M=0
LIMIT_Y=0
LIMIT_LC=0
LIMIT_LM=0


N_OF_GRAY_PARTS=1
GRAY_INK_1=K
GRAY_VAL_1=100
GRAY_HIGHLIGHT=4
GRAY_SHADOW=10
GRAY_OVERLAP=
GRAY_GAMMA=1.0
GRAY_CURVE=

# If toner inks are used (I'm not using them in this approach) you would use this section. 
# I have made this section inactive. If using toners, activate by removing the pound signs

# Toner Partition Information
#
# N_OF_TONER_PARTS=0
# TONER_INK_1=
# TONER_VAL_1=
# TONER_INK_2=
# TONER_VAL_2=

# TONER_HIGHLIGHT=10
# TONER_SHADOW=10
# TONER_GAMMA=2
# TONER_CURVE=

# N_OF_TONER_2_PARTS=0
# TONER_2_HIGHLIGHT=10
# TONER_2_SHADOW=10
# TONER_2_GAMMA=1
# TONER_2_CURVE=

N_OF_UNUSED=
UNUSED_INK_1=
UNUSED_INK_2=
UNUSED_INK_3=
UNUSED_INK_4=
UNUSED_INK_5=

# The following are manually defined curve shapes for the colored curves
# You can change curve shape and amplitude by changing the X/Y coordinates. First coordinate is 0-100K on the tone scale, the 2nd point is the ink used) 
# Below curve is Roy's toner-curve.acv, but I have lowered the maximum ink from 94% to 20% at 80K for finer control

CURVE_C="0;0 15;2.5 40;9 62;17 80;20 88;17 94;10.6 100;0"
COPY_CURVE_M=C
COPY_CURVE_Y=C
COPY_CURVE_LC=C
COPY_CURVE_LM=C
LINEARIZE="95.03 92.45 89.34 85.62 82.16 78.46 74.09 69.59 64.83 60.13 54.76 49.05 43.4 37.41 31.64 26.19 20.86 15.94 10.62 5.53 4.05"
